I've ran a 285/30R19 in the past, but switched to a 275. I couldn't find a T1R anywhere in a 285 back in the day to replace them. So now I'm wanting something with a little more beef between my Volk wheel and the road. I did the search thing, but either the pics are not working anymore or they were for a different size wheel. So I'm wanting to see anyones pics with a 285/35R19 in the rear mounted on a 19 x 9.5, not a 10"....I'm also sticking it out with my 235/35R19 until it's worn down a little more and then I'm going with a 245/35 or even a 255/35 for the front.

Thanks in advance.

 

Canadian has a set and they fit fine. Just throw them on. The sidewall are about perfect || with his INVO's .

 

Any pics, I checked on to see if he had any and I didn't see any. I'm just curious how they look.

 

275 mm is perfect for a 9.5 inch wheel. Plus or minus 10 mm is fine.

 

Thanks. Ya, I've ran a 285/30 and it bulged a little and was a pain mounting b/c of the stiff sidewall. I currently have 275/30, but want to see a difference in a little more rubber to play with in a 285/35 mounted on a 9.5 wheel. I just wanted to see a set like this mounted on a Z, that's all.

 

I am close - 19x9.5 w/ 285/30s T1R's. if you want specific angled pics I can hook you up.

 

These are 19x10" Nismo wheels with 285x35x19 KDW2s which are wider than most tires out in the same size when you actually measure their width. So this might be a good picture to help a little as your tires could be close to the same look or slightly more sunk in.

Yes I know, too many tools on this site that just don't help other than causing fights.

 

you seriously kidding me............

the hell was that for.......keep it clean or keep it off the site..............

-J

 

These are my old wheels mounted on a 285/30 rear. 9.5 wide.

 

285/35/19 Falken 451 on a 9.5" wheel

 

i have 285/35 on 9.5" Volk GT7 i will post pics tomorrow , leaving to work right now

 

Nice, and a HUGE thank you to everyone helping me out with the images. To clear some confussion to the ones that don't help on this site, (Yes) I asked a question, (Yes) I requested for pics if you had them or could produce them, (No) I did not ask for the others to hop into a thread and NOT help....If moderators have a problem with this, please feel free to shoot me a pm so we can discuss. I didn't think it was a difficult question on a site like this nor a life or death question either. Just kills me that the first person on here, terrasmak just had to start something. There should be a way to screen for idiots on here before they join.

Thank you everyone else

 

....

 

I finally got my 285/35r19s on, and these Kumho SPTs are wider than my 285 Toyos by alot. I had to role my rear fenders.

 

obviously this was taken before I mowed and edged the yard....lol