Official Aggressive Wheels & Fat Tires Thread
#3421
![Default](https://my350z.com/forum/images/icons/icon1.gif)
19x9.5 +24 (5mm spacer making it +19) 255/35
19x11 +32 285/35
BFG KDW tires.
LOVE the KDW tires. I'm making 420whp and they handle well, last long, and do great in the rain. Highly recommend them.
However this set-up is being replace very shortly.
![thumbup](https://my350z.com/forum/images/smilies/biggthumpup.gif)
#3422
Registered User
iTrader: (52)
Join Date: Mar 2007
Location: NJ/NY
Posts: 913
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
WORK Meister S1 3pc. Matte Black Step-lip
19x9.5 +24 (5mm spacer making it +19) 255/35
19x11 +32 285/35
BFG KDW tires.
LOVE the KDW tires. I'm making 420whp and they handle well, last long, and do great in the rain. Highly recommend them.
However this set-up is being replace very shortly.![thumbup](https://my350z.com/forum/images/smilies/biggthumpup.gif)
19x9.5 +24 (5mm spacer making it +19) 255/35
19x11 +32 285/35
BFG KDW tires.
LOVE the KDW tires. I'm making 420whp and they handle well, last long, and do great in the rain. Highly recommend them.
However this set-up is being replace very shortly.
![thumbup](https://my350z.com/forum/images/smilies/biggthumpup.gif)
![Smilie](https://my350z.com/forum/images/smilies/smile.gif)
Last edited by maximariceboi; 03-26-2012 at 09:04 AM.
#3427
Registered User
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Was stacking my track tires in the garage next to my OEM's and noticed I gained a tire! Haha! How's that for your fat tires thread?!
![thumbup](https://my350z.com/forum/images/smilies/biggthumpup.gif)
Last edited by supsam86; 03-26-2012 at 05:44 PM.
#3432
New Member
iTrader: (10)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
question.
the 370z rims are 19x10+30
so by adding two inches to the inside of the wheel, does that then make them
19x12+80.8
I want to double check my calculations. The face of the rim is not being touched (its outward lip to hub) demintions... however from hub to the inner part (strut) is being added two inched which is 50.8mm+
sanity check since I just pulled the trigger on this. lmao
I'll then run a 20mm spacer
19x12+60.8
the 370z rims are 19x10+30
so by adding two inches to the inside of the wheel, does that then make them
19x12+80.8
I want to double check my calculations. The face of the rim is not being touched (its outward lip to hub) demintions... however from hub to the inner part (strut) is being added two inched which is 50.8mm+
sanity check since I just pulled the trigger on this. lmao
I'll then run a 20mm spacer
19x12+60.8
Last edited by 4SHIZZIL; 03-27-2012 at 04:18 AM.
#3433
Registered User
![Default](https://my350z.com/forum/images/icons/icon1.gif)
question.
the 370z rims are 19x10+30
so by adding two inches to the inside of the wheel, does that then make them
19x12+80.8
I want to double check my calculations. The face of the rim is not being touched (its outward lip to hub) demintions... however from hub to the inner part (strut) is being added two inched which is 50.8mm+
sanity check since I just pulled the trigger on this. lmao
I'll then run a 20mm spacer
19x12+60.8
the 370z rims are 19x10+30
so by adding two inches to the inside of the wheel, does that then make them
19x12+80.8
I want to double check my calculations. The face of the rim is not being touched (its outward lip to hub) demintions... however from hub to the inner part (strut) is being added two inched which is 50.8mm+
sanity check since I just pulled the trigger on this. lmao
I'll then run a 20mm spacer
19x12+60.8
Do you have a 370? Or a 350? I don't know about 370s, but I'm 99.9% sure this won't work on a 350. The largest tire I've seen on a 350 is a 315, and that's a tight fit with a +28 offset on a 10.5" wide wheel...
If you put 345s on the back with those wheels they would be 1.7" closer to the suspension than my 315/35's... which is impossible. I was very surprised the 315s didn't rub on the rear shock.
Even with 305s on your wheels they would be almost an inch closer to the suspension than my 315s...
Good luck with that man...
![](https://my350z.com/forum/images/smilies/icon43.gif)
Last edited by supsam86; 03-27-2012 at 04:39 AM.
#3434
New Member
iTrader: (10)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
I'm pretty sure that will put you at +56mm with a 12" wide wheel. The wheel should be 2.7 inches closer to the suspension than an OEM 350z wheel...
Do you have a 370? Or a 350? I don't know about 370s, but I'm 99.9% sure this won't work on a 350. The largest tire I've seen on a 350 is a 315, and that's a tight fit with a +28 offset on a 10.5" wide wheel...
If you put 345s on the back with those wheels they would be 1.7" closer to the suspension than my 315/35's... which is impossible. I was very surprised the 315s didn't rub on the rear shock.
Even with 305s on your wheels they would be almost an inch closer to the suspension than my 315s...
Good luck with that man...![](https://my350z.com/forum/images/smilies/icon43.gif)
Do you have a 370? Or a 350? I don't know about 370s, but I'm 99.9% sure this won't work on a 350. The largest tire I've seen on a 350 is a 315, and that's a tight fit with a +28 offset on a 10.5" wide wheel...
If you put 345s on the back with those wheels they would be 1.7" closer to the suspension than my 315/35's... which is impossible. I was very surprised the 315s didn't rub on the rear shock.
Even with 305s on your wheels they would be almost an inch closer to the suspension than my 315s...
Good luck with that man...
![](https://my350z.com/forum/images/smilies/icon43.gif)
I have the 370 19x10s 305/35/19 on now with a 20 mil spacer. I have at least 4.3 to 4.5 inches of room from hitting anything. so adding the two more inches is not an issue. I have my fenders rolled and I am also debating on a Slight Pull.
I know it sounds crazy but with the 305s on, the car has PLENTY of room, which is why I made the plung! Just want to make sure my offset math is right for the OUTSIDE.
the 345 will be a 345/30/19 not a 35 series, if that helps.
I really dont want to pull my fenders as of yet.
The pic is a 305/25/20 with a +25 offset. I had almost 5 inches or play with these on. So this is the rim that started me down this NO LIP, wide rim path. I could of added a 5 or 10 mil spacer easy with these too.
Last edited by 4SHIZZIL; 03-27-2012 at 05:26 AM.
#3439
Registered User
iTrader: (85)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
^oh my lanta....
how do you guys feel about a 10.5 +11 volk on a 315/30/19 hoosier r6?
mind im on coils, stock camber, and spc toe bolts. trying to dial in my track setup. fronts are 9.5 +28 (using 25mm spacer) what front tire would you guys recommend? going for max grip possible, need obese tires
how do you guys feel about a 10.5 +11 volk on a 315/30/19 hoosier r6?
mind im on coils, stock camber, and spc toe bolts. trying to dial in my track setup. fronts are 9.5 +28 (using 25mm spacer) what front tire would you guys recommend? going for max grip possible, need obese tires