lgear080

iTrader: (21)

rears are rolled, front stock untouched. will shoot some more tomorrow.

the rear is flyyyyyyy

yes 35 series aa.

thanks for the + input

BSERIEuS

thanks for getting back to me on this. sportlines seem to be more of an aggressive drop so hopefully i won't have many issues.

i dig it. especially the tape and everything.

Veil350z

iTrader: (6)

the offsets are 20x9 +15 on the front and 20x11 -7 on the rear.. Thanks for the help


Thanks for the advice.. im just new to this whole tire and fitment and offset for cars!!.. i was looking at 35 sidewall.... i wanted to also know why cars usually have a lower side wall on the rear then the front?

vex008

iTrader: (4)

willing to "let" you sell me that hood to put towards the real wheels!

Car looks great.

3xalt

hi guys, i need help for wheels setup

i have wheels 19 in with width 10 ( front and rear ) and offset +15.

what tire size that my car is free from rubbing issue?

my friend suggest me to use 245/35/19 and 265/35/19. is this spesification make flush look and stretch tire?

thanks for advise

KingBaby

iTrader: (3)

no

datsunHEAD

iTrader: (17)

^^^^^lmao we should put that whenever a noob ask a question

r_seng

iTrader: (9)

Received my Weds TC105Ns last week. Waiting on tires and coilovers to arrive (along w/ A LOT more goodies). I'm looking to run Ventus V12 EVOs.

Specs will be:

18x9.5 +10 265/35/18
18x10.5 +12 285/35/18

dkmesa350z

iTrader: (41)

Nice, love those wheels. You could probably clear 295/35 in the rear if you are so inclined. I run a 19x10.5 +12 with a 285/35-19 and, even though they are about half an inch taller than 285/35-18, I clear my rolled fenders by at least 5mm (lowered 1.4" with -1.6 camber).

NA&CH

iTrader: (74)

dvice would be great. I am looking at picking up a set of 19x9.5 +0 and 19x10.5+0 what tire would I be able to smash under the fenders. The rear will be rolled the front stock. I am lowered on eibach spings. I am looking at buying some coilovers. I have a rear camber kit and cusco control arms.

If the +0 won't allow a meaty tire then +12's are available. Also Would I be able to do a square setup 10.5 all four with a nice size tire?

All help with be appriciated

Thank you,

Chris

Barnabas

iTrader: (15)

10.5 +12 upfront wont fit

in the rear its perfect.

you need like a +30 upfront to fit a 10.5

If you get the 9.5 and 10.5 +12 and do a fender roll in the rear you can do a 265/285 tire combo.

NA&CH

iTrader: (74)

Awesome. Thank you. After looking it seems the +0 is for the stretch tires.

Thanks a bunch.

scotts300

iTrader: (46)

It can work with a small profile tire. My 285/30/18 +15s work well on the 10.5" width front wheel. I've seen 275/35/18 on a 10.5 +15 work as well; I don't think the extra (less) 3mm of offset is an equation killer.

blacknblue2002

iTrader: (1)

Make sure you do a fender roll in the rear!!! Not sure if you were already planning this or not, but if you're going anywhere near as low as me on those coilovers it will be a must. Mine are rolled and I'm sitting on sportlines and my fitment is TIGHT...can't fit a finger between the tire/fender front or rear

gerb

since you guys are on the topic about fitting a 265 upfront...
Would a 265/30 on a 19x10.5 +12 fit in the front?

Toby-22

iTrader: (25)

depends how low you are, i rubbed once in a while with my 275/30/19 on 10.5 +19...but i was low as hell

r_seng

iTrader: (9)

Fenders are already rolled, I'm not looking to turn my car into street sweeper

gerb

275/30 upfront?

got pix, Im planning to ride pretty low.
I like the stretch of a 265/30
But not sure if it'll fit or not upfront

Barnabas

iTrader: (15)

if any of you fat tires guys are interested...

https://my350z.com/forum/competition...t01s-27-a.html

as soon as I get shots with my username these will be in the normal marketplace as well.

NA&CH

iTrader: (74)

Barn I love the way those look on the MCR cars.

Just listed my 18's with 265-295's if anyone is interested.

Chris