Volk replicas found again
11-04-2009, 08:40 PM
#41
if it says 'japan' and 'monoblock', it most likely reprinted the 'volk racing' that appears on the same portion of the rim face.
It appears (clockwise from the valve stem hole, 2 spots over, between (agin clockwise from the spoke preceding the valve stem) the 2nd and 3rd spoke.
This section of the rim can only be seen in the first pic the OP posted I think, on the bronze set of knock off rims. There is clearly language printed on the rim, though I cannot definitively say what is says (bad resolution), there is writing in the same location so we can assume if they copied JWL, Japan, Forged Monoblock and the other markings (when they are neither JWL, from Japan or forged monoblocks) that it also duplicated the Volk Racing.
Rays appears on the back of the rim spoke, and it is also probably there, though I cannot confirm it. If Mackin gets involved they can surely buy a set and prove this. I am not however.
It appears (clockwise from the valve stem hole, 2 spots over, between (agin clockwise from the spoke preceding the valve stem) the 2nd and 3rd spoke.
This section of the rim can only be seen in the first pic the OP posted I think, on the bronze set of knock off rims. There is clearly language printed on the rim, though I cannot definitively say what is says (bad resolution), there is writing in the same location so we can assume if they copied JWL, Japan, Forged Monoblock and the other markings (when they are neither JWL, from Japan or forged monoblocks) that it also duplicated the Volk Racing.
Rays appears on the back of the rim spoke, and it is also probably there, though I cannot confirm it. If Mackin gets involved they can surely buy a set and prove this. I am not however.
Whatever is imprinted into the wheel face definitely does not say "Volk Racing" or "Rays Eng". Plus, the font is nowhere near the Genuine Volk style.
I doubt anyone is dumb enough to actually rep them as Genuine "Volks", they are clearly stated as "replicas"...
Just my .02
11-04-2009, 08:45 PM
#42
Registered User
iTrader: (6)
Join Date: Sep 2008
Location: West Virginia
Posts: 548
Likes: 0
Received 0 Likes
on
0 Posts
^^ atleast someone agrees with on the what it says.. i looked at the bronze and gold wheels like u said and the lettering isnt even the same. i dont think they would be dumb enough to put "volkracing" on them
i dont know whats up with all the hate on these.. the quality is obviously no where near the same but for the price it really isnt a bad wheel at all for normal driving.
i dont know whats up with all the hate on these.. the quality is obviously no where near the same but for the price it really isnt a bad wheel at all for normal driving.
11-04-2009, 09:30 PM
#43
"Monoblock, Japan, Forged" and have the JWL symbol. They basically replaced the Volk Racing or rays part with "Japan" lol
I jumped the gun a bit and just thought they copied everything on the TE's since they have every other phrase on their fakes.
I doubt anyone is dumb enough to actually rep them as Genuine "Volks", they are clearly stated as "replicas"...
Just my .02
Just my .02
11-04-2009, 10:01 PM
#44
New Member
iTrader: (6)
Join Date: Dec 2007
Location: SAN DIEGO, CA
Posts: 1,515
Likes: 0
Received 0 Likes
on
0 Posts
That thread was foking classic Rick... I still bust out laughing at the thought of it till this day. 
EDIT: Did a search on that thread and couldn't find it. Must have got deleted...
Last edited by _STEVEO_01; 11-04-2009 at 10:05 PM.
11-06-2009, 11:29 AM
#48
hey guys,
they posted again in the los angeles craigslist.. these are the 350z specs i guess
http://losangeles.craigslist.org/lgb...454409451.html
Brand: VARRSTOEN
(WWW.VARRSTOEN.COM)
Style: ES 2.2 (VOLK RACING REPLICA FACE I & FACE II)
Structure: 1-Piece Low Pressure Cast
Fitment: 2003-2008 NISSAN 350Z (Fairlady Z33)
Front: 19X9.5 +22
Rear: 19X10.5 +22
Hub Bore: 66.1 (100% Hub Centric No Spacers or Hub Rings needed)
Certification: JWL/VIA
FINISH: MATTE BLACK
***WE ALSO DO CUSTOM POWER COATING AT AN ADDITIONAL COSTS***
FOR QUICKER SERVICE PLEASE CALL US DIRECT AT 562 981 4110.
CUSTOM POWDER COAT FINISH:
MATTE ANTHRACITE
looks good, but i don't know anything about wheels lol
they posted again in the los angeles craigslist.. these are the 350z specs i guess
http://losangeles.craigslist.org/lgb...454409451.html
Brand: VARRSTOEN
(WWW.VARRSTOEN.COM)
Style: ES 2.2 (VOLK RACING REPLICA FACE I & FACE II)
Structure: 1-Piece Low Pressure Cast
Fitment: 2003-2008 NISSAN 350Z (Fairlady Z33)
Front: 19X9.5 +22
Rear: 19X10.5 +22
Hub Bore: 66.1 (100% Hub Centric No Spacers or Hub Rings needed)
Certification: JWL/VIA
FINISH: MATTE BLACK
***WE ALSO DO CUSTOM POWER COATING AT AN ADDITIONAL COSTS***
FOR QUICKER SERVICE PLEASE CALL US DIRECT AT 562 981 4110.
CUSTOM POWDER COAT FINISH:
MATTE ANTHRACITE
and VORK instead of VOLK
11-06-2009, 01:33 PM
#60
I don't these pictures are hi-res enough to get a clear enough look at either logo.
and the slight difference in the shape of the 'Y' in Rays, could be due to sharpness loss in the duplication of the rim when making the mold.
I also believe that the TE37 only has all the writing around the rim on certain sizes, maybe the 19 inch only?
here is a decent shot of a real TE37:
You can also see the different font used for 'monoblock' in it. and not sure, the authentic also says 'made in japan', not just 'japan', explaining the odd spacing.
and the slight difference in the shape of the 'Y' in Rays, could be due to sharpness loss in the duplication of the rim when making the mold.
I also believe that the TE37 only has all the writing around the rim on certain sizes, maybe the 19 inch only?
here is a decent shot of a real TE37:
You can also see the different font used for 'monoblock' in it. and not sure, the authentic also says 'made in japan', not just 'japan', explaining the odd spacing.
Last edited by Motormouth; 11-06-2009 at 01:45 PM.