Varrstoen Wheels Thread
#1681
Registered User
Join Date: Dec 2012
Location: Long Island, N.Y.
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
Can anyone confirm whether or not 18x10.5 +0 ES2s all around will clear the akebono brake kit without running spacers?
Also planning to install BC coilovers with around a 1 finger gap if that makes any difference. I would also likely run 275/40/18
Edit: From what I'm reading on another forum the 19x10.5's with +12 will clear the 370z akebono kit, +22 will not and 0 should as well.
Also planning to install BC coilovers with around a 1 finger gap if that makes any difference. I would also likely run 275/40/18
Edit: From what I'm reading on another forum the 19x10.5's with +12 will clear the 370z akebono kit, +22 will not and 0 should as well.
Last edited by XG624; 01-15-2014 at 06:02 AM.
#1685
Registered User
Join Date: Aug 2013
Location: San Antonio, Tx
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Varrstoen ES222 (hyper black)
Searching for that right pair of specs for my ultra yellow paint, but want to stay in the alloy/grey color zone. The Varrstoen's I'm looking at are called hyper black but are more along the lines of a greyish/gunmetal color. What do you guys think/recommend? The yellow paint makes it a little harder on a decision. Any ideas? Recomendations? Don't really want to go black though.. Thanks!
#1690
#1691
Thanks man. I was surprised too when I had them installed, granted the rear sits a tad higher when the gas tank gets low,but it has a stalled me from buying any springs/coils for the time being.
#1692
Registered User
Join Date: Mar 2013
Location: Louisiana
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
#1693
Or at least what to get first
#1694
Registered User
#1696
Registered User
Hi!. I'm about to purchase a es5 varrstoen. My question is whether this model with the brembo et 12 are saved. Thank you! ... And in the front and output would no spacers. One?? :-)). Thank you!. Greetings!
#1697
Registered User
Join Date: Dec 2013
Location: Philadelphia, PA
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Thinking about running 18x9.5 et 12 and 18x10.5 et 15 on stock height would I need to my fenders rolled? or what profile should I get to avoid fender rolling for the time?
Last edited by J Dan; 01-26-2014 at 10:13 PM.
#1698
Registered User
Join Date: Sep 2011
Location: Las Vegas
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
What would be a good tire size for
Es2
19x9.5 +0
19x11 +0
I checked rim tuck and this guy is running 225 35 255 35 but on the bbs lm rep 1.1?. Anyone running this setup yet? I haven't seen that many posted with the es2 yet. Car has spc toe bolt spc toe arm, kenitx front a arms and rolled and a little pull on the fenders.
Es2
19x9.5 +0
19x11 +0
I checked rim tuck and this guy is running 225 35 255 35 but on the bbs lm rep 1.1?. Anyone running this setup yet? I haven't seen that many posted with the es2 yet. Car has spc toe bolt spc toe arm, kenitx front a arms and rolled and a little pull on the fenders.
#1699
To keep stock tire diameters you want 255 35 and 285 35 F/R but w/+0 offset I feel like you will have huge problems with clearance
I think +12 will work a lot better and still be pretty flush
I think +12 will work a lot better and still be pretty flush
#1700
Registered User
Join Date: Sep 2011
Location: Las Vegas
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts