GeauxLadyZ

iTrader: (9)

If i'm still alive at the end of the day from my wheel staying intact though bent...instead of shattering and losing my entire wheel while driving..................................................... ........................................................ yes, lol, it does really matter.

dan avoN7

Any wheel can crack/bend given an impact. The crack on your wheel (inside barrel) is likely a stress fracture due to hitting a pothole or uneven road surface. It's not likely to bend due to the sheer forces that caused it to crack immediately.


Do you have proof of any of these "inferior" wheels shattering WHILE driving? I mean it's one thing to slam in to a curb, wall, etc.. at 50mph+ and shatter a wheel (in which case the car will already be stopped or immobile after the fact) versus a wheel just falling apart from striking a bump/pothole in the road (which I have never seen before and probably never will see..).

Kiriller

iTrader: (2)

... you know what... im just going go ahead and say this...

http://www.youtube.com/watch?v=GrIp3k5pJQM

GeauxLadyZ

iTrader: (9)

...



LOL What more do you want?

I am not arguing the brand name here, we are talking construction. A forged wheel is much stronger than a pressure/gravity cast wheel hands down and has way less of a chance of being damaged versus the cheaper cast.

ALL wheels, and i mean ALL WHEELS have had failures, no one here is arguing this, on road and esp on the track and off road like above. Point is, the cheaper cast wheels have a much higher and quicker failure rate as ANY wheels life span is limited, and they are more likely to crack (bc pressure/gravity cast) instead of bend/warp like forged wheels.

This, good sir, is why I specifically said Ill take my chances with a better made wheel then with an inferior wheel.

In addition, i would take, for example, a casted wheel using Enkie's technology, equipment, methods, standards, QC, over one such as Varrstoen in a heartbeat. To say Varrdogs or Rotas use the same all above as Enkie is just something i will continue to not believe.

Remember, we are talking MOC and structural integrity of forged vs. pressure/gravity cast here. This IS a proven fact you cannot dispute.

Call me a fanboy or whateverthefuk to justify to yourself (not you specifically) you have purchased an equal product with an equal lifespan for much cheaper...lol. More than anything, i just love to argue/debate and ill do this all day long, others will attest to this.

/rant-soapbox

Flo-ridaZ33

iTrader: (60)

^Why bother casting pearls to swine... FNG's know everything about everything. Good write up though.

GeauxLadyZ

iTrader: (9)

^ I know, i know,.... Some down time at work so i intarwebbing

VQpoweredZ

iTrader: (18)

Very true, I would like to see the Varpuppies take the beating that LMGT4 did, haha.

Ak48z

iTrader: (2)

Lol @ volk owners trying to justify strength like it is a real world problem. 99% of you will never find yourself in a situation where you are going to say "Oh I am glad I shelled out 3k so my wheel didn't shatter into 100 pieces"

GeauxLadyZ

iTrader: (9)

^ Lol @ you trying to justify to us that it's not a problem for us then laughing at us for justifying that strength is a problem.

Wrap your dome piece around that one, nooberz.

Ak48z

iTrader: (2)

You forgot the word "trying" , sorry.

GeauxLadyZ

iTrader: (9)

^ We are not "trying", we are "doing"...only you are "trying". Left out intentionally, sorry.

VQpoweredZ

iTrader: (18)

Thanks for all of your 12 posts

DavesZ#3

iTrader: (26)

OMG - not another broken wheel thread. Please, give it a rest.

Every wheel can break. The difference is how many per 100,000 produced ever fail. Unless you have published facts and evidence to support your claims (both sides of the argument), then all you are doing is......

Zian

I hoped I was wrong.

I clicked on the thread expecting to see a crack in a wheel and then a long rant from the volk/work/rays fanclub about how the wheels are still so superior and how this is ridiculous and OP you must have done something crazy and waah waah waah

But...there it was. Exactly as described. Boo. (And don't jump me--i've got Rays wheels)

Waiz

iTrader: (57)

I've daily driven my LM's for the past 2.5 years in some of the worst roads in the US (Los Angeles) and my wheels are no worse for wear.

I just wonder what the OP did to cause this, it seems fishy that he would bash his OWN wheel.

DJK

iTrader: (9)

I've had them for 6.5 years
I'm glad that MY driving record is coming under fire (coulnd't POSSIBLY be the wheel or manufacturer right?)
I daily drive my car to work, gym and errands.
Never tracked
Never drifted
Never raced
The car sees a maximum of 200miles a week (as of late it's around 100miles)

I am bashing them because I paid the extra $ for rays, knowing they wouldn't crack. When I was told they were cracked when I brought it in to fix a flat - my jaw almost hit the floor. I always thought Ray's came with a lifetime warranty (because they never crack), turns out I was wrong.

Waiz

iTrader: (57)

Those aren't Volks, they're Nismos which are made by Rays.

You're delusional if you think any wheel has a lifetime warranty.

DJK

iTrader: (9)

It was a joke - the fact that they never crack is a lifetime warranty, right?

Waiz

iTrader: (57)

6.5 years and a slight crack that was easily fixed, MEH

Again I'm not sure why you made a thread to bash you're own wheel

Ak48z

iTrader: (2)

Obviously you have not proven anything nor will you ever, so, you are still trying. Thanks.

Volk nutswingers ftw - you can have my nuts too I know you like them.