Being shown on a Neon should be a clue...

 

Do not like Konigs.

 

It takes a certain *mind set*... I like to push the envelope and explore new possibilities. "Ricey"???...No...that term applies to blatant exhibitionism. Pics to follow...stay tuned.

Meantime..here are some *gross ricer picks* of this wheel on a MSP3
So far, other than the pic I posted earlier, there are very few pics available on our car.







On EVO...18X9.5 25 offset (what I ordered):

 

link to website?

 

I'm sorry but Hell No

 

RG-D for me.

 

You fail at reading comprehension... The wheels obviously fit but for that style wheel you'd need a lower offest.

 

you'd need a lower offest


Yeah.....OFFEST..
Ok Mr. *FLUSH*.......what did I *fail* to comprehend here?
You mean I *failed* to see that the wheels didn't meet your *flush* standard? The fact that with this set up, they are now almost an inch farther out and isn't enough? The fact that it's equivalent to 20mm spacers (with stock wheels) with only an effective 5mm increase in offset? I suggest you read up and learn something about the effects of excessive offset. This set up is better than my current stock wheels with 15mm spacers. But of course, you already knew that..yeah.....sure ya did.

 

Like I said..only in your dreams

 

NO.................................[/B]

 

oh god... 18x8... failing...

 

Noooooooooo

 

^ my first thought

 

Poor GT-R...I wouldn't even put those wheels on my EM2 Ex beater....

 

Your dreaming that they look good.

 

Undecided, but not to bad. Throw them on with a 10mm spacer out back. Good to go.

 

Ok guy... again you failed to read into my point. Don't ask for opinions when your going to get a handful of sand in your vagina when someone doesn't like the wheel. Why are Advan RS/D, Enkei GTC's, and SSR multi spoke set up's look better on a Z than the Konigs you picked? The offset vs WHEEL STYLE is what I'm talking about. I'm not talking about the offsets to achieve the flush look... I'm talking about the RIM itself. The concavity of the Advans and SSR's make them look better, the GTC's have a wider spoke so it doesn't look like crap. I've owned more rims than you've owned cars guy so spare me the attempt to school me. I don't need spacers because I buy the correct offset to begin with. Those rims do not flow with the body lines of the Z... you obviously have no taste and if you had more money you'd still buy a garbage set of wheels, here's an example of your taste:

https://my350z.com/forum/wheels-and-...ur-dreams.html

Don't post an opinions thread when there's good advice that was given but you failed to heed.

 

better slam your car and buy some like 25mm spacers, MAYBE itll work after that.

 

ill take rotas over that, thanks.