Hey guys

what is the biggest wheel for Z without fender roll ?

I wanna have the tire size of 275 or 285 on rear / 245 or 255 on front with 18 inch wheels.
Will this fit in Z ?

 

18x10.5 +30 will fit out back without rub with a 275/40-18. With a 5mm spacer installed i started to rub. Just roll the rear fenders, i did a nice roll and run a 10.5 +10 out back. An 11 or 11.5 inch wheel will easily fit with a roll and some nice 305 tires.

 

You can go up to 20" depending if you are lowered or not. I have 20"

 

You could go 20 regardless

 

What ever diameter you want and as long as the camber is zero'd you can fit a 10.5 +22 with a 275/35 (19)

But technically you said wider.... you could run up to an 11.5 without need a roll but the offset would be somewhere around +34

 

Think they answered it nicely. Personally I think 19" looks perfect on Z's. Depending on the style I think a lot of 20" wheels looks a bit too large to the point where it starts to look a little silly. Again my opinion. Sometimes this pops in my head:



I went to Florida recently and saw these all over the place....the most silly and retarded looking things i've ever seen.

 

^ dam, thats one sweet ride. need to get me some of those rims

 

rimmed up with killers system

 

i currently have 275s on the rear with a 9.5" wide, 18" diameter wheel. no problem, i'm at about +15. You can run a 11.5" wheel without a problem if you wanted to i believe. Not sure why you'd want to though....this isnt a corvette z06...

 

Start here:

https://my350z.com/forum/2487452-post8.html

Then Finish here:

https://my350z.com/forum/wheels-and-...ead-index.html