Enkei/Tenzo? - need advice for offset
#1
Enkei/Tenzo? - need advice for offset
Wanna get a bigger wheel, Appreciate if anyone can give an advice?
2003 base.
Candidate 1: Tenzo type M
F - 19*8.5 offset +17
inner clearance comparing with OEM: same
outer clearance: +26mm
R - 19*10 offset +22
inner clearance: -14mm
outer clearance: +36mm
Candidate 2: Enkei Raijin
F - 18*8.5 offset +35
inner clearance: -18mm
outer clearance: +8mm
R - 18*9.5 offset +15 /;;;;+35
inner clearance: -1mm ;;;; inner clearance: -21mm
outer clearance: +37mm ;;;; outer clearance: +17mm
I did research in the site, but not able to find the answer. wondering if the offsets are fit for my 03 base?
Thanks in advance!
2003 base.
Candidate 1: Tenzo type M
F - 19*8.5 offset +17
inner clearance comparing with OEM: same
outer clearance: +26mm
R - 19*10 offset +22
inner clearance: -14mm
outer clearance: +36mm
Candidate 2: Enkei Raijin
F - 18*8.5 offset +35
inner clearance: -18mm
outer clearance: +8mm
R - 18*9.5 offset +15 /;;;;+35
inner clearance: -1mm ;;;; inner clearance: -21mm
outer clearance: +37mm ;;;; outer clearance: +17mm
I did research in the site, but not able to find the answer. wondering if the offsets are fit for my 03 base?
Thanks in advance!
Last edited by swat518; 03-18-2012 at 07:17 PM.
#3
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
Wanna get a bigger wheel, Appreciate if anyone can give an advice?
2003 base.
Candidate 1: Tenzo type M
R - 19*10 offset +22
Candidate 2: Enkei Raijin
[U]R - 18*9.5 offset +15
I did not research in the site, cause i was not able to find the answer. wondering if the offsets are fit for my 03 base?
Thanks in advance!
2003 base.
Candidate 1: Tenzo type M
R - 19*10 offset +22
Candidate 2: Enkei Raijin
[U]R - 18*9.5 offset +15
I did not research in the site, cause i was not able to find the answer. wondering if the offsets are fit for my 03 base?
Thanks in advance!
#7
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
+15 is the wheel you will want.
Trending Topics
#11
#13
back in march the threat stop when terrasmak mention that +15 is the whell u want...
i got confuse
got cha 18x9.5 +15 all round but need to add 10-15spacer in the back
what is the reason for add spacer in the back? is it just because of the look-bigger lips-deeper concave?
**for example** comparing [18x9.5 +15 with 20mm spacer] & [18x9.5 +35]
both will have the same flushing widith at the rear fender the only different is +15 offset rim will look better
i got confuse
got cha 18x9.5 +15 all round but need to add 10-15spacer in the back
what is the reason for add spacer in the back? is it just because of the look-bigger lips-deeper concave?
**for example** comparing [18x9.5 +15 with 20mm spacer] & [18x9.5 +35]
both will have the same flushing widith at the rear fender the only different is +15 offset rim will look better
Last edited by liQUidSkYZ; 09-15-2012 at 02:13 PM.
#16
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
Just grab 9.5 +15 for front and rear, mount some 255/40 up font and 275/40 on the back. You may want a small spacer for the rear , depending on your liking.
Thread
Thread Starter
Forum
Replies
Last Post
liqalu04
Engine & Drivetrain
31
01-02-2022 12:58 PM
Colombo
Forced Induction
35
11-09-2020 10:27 AM