Notices
Wheels & Tires 350Z Rollers and Rubbers

URGENT! Need help :(

Thread Tools
 
Search this Thread
 
Old 04-29-2012, 06:55 PM
  #1  
Henryh1992
Registered User
Thread Starter
 
Henryh1992's Avatar
 
Join Date: Apr 2012
Location: Canada
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default URGENT! Need help :(

Hey there everyone,

I purchased these tires for my 350z today, the problem is that the guy didn't have spacers or tuner lug nuts.

Heres the link: http://vancouver.en.craigslist.ca/rd...985212784.html

My question is what spacers do I need? I looked around and I would guess 10mm spacers? can someone link me to the spacers I need?

Front Wheels:
18"x8.0 +30 offset | with Sumitomo 245/40ZR18
Back Wheels:
18x9.5 +35 offset | with Sumitomo 275/35ZR18

I would appreciate all the help I can get!

Thanks in advance
Henryh1992 is offline  
Old 04-29-2012, 07:02 PM
  #2  
Ak48z
Registered User
iTrader: (2)
 
Ak48z's Avatar
 
Join Date: Aug 2010
Location: Virgin-ia
Posts: 636
Likes: 0
Received 0 Likes on 0 Posts
Default

Not sure if the currency is that much difference in Canada... but those wheels are $1000 new lol.

nevermind they came with tires too, didnt read much.... you are going to need some big spacers though if you are wanting flush.

Last edited by Ak48z; 04-29-2012 at 07:04 PM.
Ak48z is offline  
Old 04-29-2012, 07:10 PM
  #3  
Henryh1992
Registered User
Thread Starter
 
Henryh1992's Avatar
 
Join Date: Apr 2012
Location: Canada
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

I wish someone could tell me the exact spacers ill need
Henryh1992 is offline  
Old 04-29-2012, 07:16 PM
  #4  
Bmurray350z
New Member
iTrader: (34)
 
Bmurray350z's Avatar
 
Join Date: May 2011
Location: Burlington, NC
Posts: 8,069
Likes: 0
Received 91 Likes on 47 Posts
Default

are you trying to make your wheels flush or what? you'll need some pretty big spacers to even make it look close to flush. i would go with 30mm in the rear and 25mm in the front.

you need to look through here:
https://my350z.com/forum/wheels-and-...er-thread.html
Bmurray350z is offline  
Old 04-29-2012, 07:21 PM
  #5  
Henryh1992
Registered User
Thread Starter
 
Henryh1992's Avatar
 
Join Date: Apr 2012
Location: Canada
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Bmurray350z
are you trying to make your wheels flush or what? you'll need some pretty big spacers to even make it look close to flush. i would go with 30mm in the rear and 25mm in the front.

you need to look through here:
https://my350z.com/forum/wheels-and-...er-thread.html
Well I would prefer it to be flush, but as of right now I'm afraid my wheels will rub if I put em on with out spacers
Henryh1992 is offline  
Old 04-29-2012, 07:21 PM
  #6  
Waiz
Premier Member
iTrader: (57)
 
Waiz's Avatar
 
Join Date: Feb 2008
Location: SoCal
Posts: 18,465
Likes: 0
Received 10 Likes on 8 Posts
Default

OP, you should always title your threads according to the topic you would like help with.

This particular thread is grossly miss-labeled and would not have been needed if you just took a second to look around and read the wheel thread index or the spacers thread that Bmurray highlighted below.

/thread

Originally Posted by Bmurray350z
are you trying to make your wheels flush or what? you'll need some pretty big spacers to even make it look close to flush. i would go with 30mm in the rear and 25mm in the front.

you need to look through here:
https://my350z.com/forum/wheels-and-...er-thread.html

Last edited by Waiz; 04-29-2012 at 07:29 PM.
Waiz is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bboypuertoroc
Tuning
3
08-18-2007 11:42 AM
silver nismo
Forced Induction
10
11-07-2006 05:19 AM
Z350Lover
Forced Induction
5
11-29-2005 12:53 PM
Tekwon-V
2003-2009 Nissan 350Z
3
01-24-2005 05:33 PM



Quick Reply: URGENT! Need help :(



All times are GMT -8. The time now is 02:26 PM.