Notices
Wheels & Tires 350Z Rollers and Rubbers

offset for 19" wheels

Thread Tools
 
Search this Thread
 
Old Jan 15, 2004 | 10:32 AM
  #1  
BlackNissan350z's Avatar
BlackNissan350z
Thread Starter
Registered User
iTrader: (1)
 
Joined: Oct 2003
Posts: 133
Likes: 0
From: Vero Beach,FL
Default offset for 19" wheels

Ok I have done a search but have a hard time finding a definate answer....


I am lookin at gettin some 19" Axis Milano wheels, they are 19x8.5 up front with a 2.25" lip these run in 15,35,40,47mm offsets, the rears are 19x9.5 with a 3.5" lip and these run in 20,40,45mm offsets...so my question is which offset for front and rear are gonna fit best on a 2003 performance model.
Reply
Old Jan 15, 2004 | 11:58 AM
  #2  
N74DV's Avatar
N74DV
Registered User
 
Joined: Oct 2002
Posts: 1,262
Likes: 0
From: Mesa,AZ
Default

on a 19x9.5 I'd go with the 20mm offset. 45 is WAY to high..... they'd be sitting pretty far inside.
Reply
Old Jan 15, 2004 | 12:11 PM
  #3  
BlackNissan350z's Avatar
BlackNissan350z
Thread Starter
Registered User
iTrader: (1)
 
Joined: Oct 2003
Posts: 133
Likes: 0
From: Vero Beach,FL
Default

Originally posted by N74DV
on a 19x9.5 I'd go with the 20mm offset. 45 is WAY to high..... they'd be sitting pretty far inside.
what are the offsets on your rims? also doe the size of the lip have anythin to do with the offset
Reply
Old Jan 15, 2004 | 12:18 PM
  #4  
N74DV's Avatar
N74DV
Registered User
 
Joined: Oct 2002
Posts: 1,262
Likes: 0
From: Mesa,AZ
Default

lip has nothing to do with it. offset in combination with wheel width will tell you all you need to know.

my offsets are about 25mm in rear (9.5" rim) and 12mm in front (8.5" rim)
Reply
Old Jan 15, 2004 | 12:26 PM
  #5  
BlackNissan350z's Avatar
BlackNissan350z
Thread Starter
Registered User
iTrader: (1)
 
Joined: Oct 2003
Posts: 133
Likes: 0
From: Vero Beach,FL
Default

Originally posted by N74DV
lip has nothing to do with it. offset in combination with wheel width will tell you all you need to know.

my offsets are about 25mm in rear (9.5" rim) and 12mm in front (8.5" rim)
well im thinkin about goin with the 15mm up front and 20mm rear...what do u think?
Reply
Old Jan 15, 2004 | 10:16 PM
  #6  
vfr350's Avatar
vfr350
Registered User
 
Joined: Apr 2003
Posts: 281
Likes: 0
From: chicago burbs
Default

so i was looking at a set of 18" with 35 offset 8.5 wide for all four corners, are you thinkin they would sit to far in???
Reply
Old Jan 16, 2004 | 01:23 AM
  #7  
N74DV's Avatar
N74DV
Registered User
 
Joined: Oct 2002
Posts: 1,262
Likes: 0
From: Mesa,AZ
Default

Originally posted by BlackNissan350z
well im thinkin about goin with the 15mm up front and 20mm rear...what do u think?
that'll work. the rear will be pretty close to the fender but it should just barely clear
Reply
Old Jan 16, 2004 | 01:24 AM
  #8  
N74DV's Avatar
N74DV
Registered User
 
Joined: Oct 2002
Posts: 1,262
Likes: 0
From: Mesa,AZ
Default

Originally posted by vfr350
so i was looking at a set of 18" with 35 offset 8.5 wide for all four corners, are you thinkin they would sit to far in???
35 on an 8.5 is not too bad but it is a little higher than it should be. You should look for a 25 or so for that.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Obadabot
Maintenance & Repair
16
Jun 18, 2023 11:31 PM
Depravity
Brakes & Suspension
14
Oct 1, 2015 04:49 PM




All times are GMT -8. The time now is 10:24 AM.