Volk GTS -- Seeking Help!!
05-19-2013, 02:08 PM
#21
All four valve stems are in their normal locations near the face and are seated in the center of all the barrels
Additionally, there are 3 TPMS locations in these positions. I really hope things work out too, thanks br0. I should find out later today on whether or not i'll be getting that barrel for free or not. You're right. All principle
Additionally, there are 3 TPMS locations in these positions. I really hope things work out too, thanks br0. I should find out later today on whether or not i'll be getting that barrel for free or not. You're right. All principle
Here's the Volks>>
Last edited by ronn1; 05-19-2013 at 02:11 PM.
05-19-2013, 02:21 PM
#22
The regular valve stems look like this. Do you think I should replace the rubber one's that belong to the TPMS? Either way, if I get that spare barrel i'll only have 2 TPMS locations, i'd have to either drill 2 holes (which I hear is bad to do) or band them.
05-21-2013, 01:24 PM
#29
Seller made me purchase the spare barrel for $250. Not happy. Like mentioned before, it's all about the principle..not price. Once that barrel arrives i'll be swapping the face to that one, and keeping this hack job welded barrel as a backup. If it was the same width, I wouldn't have really cared but like I said before things like this need to be disclosed before payment is sent. My advise to anyone on here is to really make sure you are buying from a well-known member of the site. The seller of this transaction had a perfect iTrader rating, so I decided to go through with it...but clearly that was a mistake
I have a friend in Washington that wrecked one of his GTS wheels, so he will be giving me those assembly bolts which will be just enough to have a complete set of matching wheels. In the meantime, i'm going to take these to a wheel repair specialist to make them look like-new again. Some of the stickers are peeling off, but they're all there. I'll talk to them and see what they think my options are for that. I also bought some iForged TPMS adaptors to attach to the regular valve stems so I don't have to drill a hole in this 4th wheel. It still blows me away that this guy had HOLES DRILLED IN HIS VOLK WHEELS just for TPMS.
/rant
05-21-2013, 02:38 PM
#34
This has been really frustrating, and i've been trying to keep my cool but enough is enough. I have never been so disappointed in my life. advancetek/Anthony should not be allowed to conduct any sort of business on this site.
"I'm d second owner of d wheels I don't know d history before" - How can you even say this? You are responsible as the seller to disclose all known history of an item prior to closing the deal. And clearly you did know because after the wheels were shipped and you had the funds, you said it has "sealer that goes over the weld. The barrels are welded that wheel got re finished/clean up by wheel flip"
Had I known these were previously hacked up with a crappy weld, drilled barrels for TPMS, and missing/loose bolts...I would have never gone through with this nightmare. I will ensure no one else on this site has to go through this ever again.
"I'm d second owner of d wheels I don't know d history before" - How can you even say this? You are responsible as the seller to disclose all known history of an item prior to closing the deal. And clearly you did know because after the wheels were shipped and you had the funds, you said it has "sealer that goes over the weld. The barrels are welded that wheel got re finished/clean up by wheel flip"
Had I known these were previously hacked up with a crappy weld, drilled barrels for TPMS, and missing/loose bolts...I would have never gone through with this nightmare. I will ensure no one else on this site has to go through this ever again.
