Cosmis Racing Wheels thread
#81
#83
I believe so, it will be close. You will need a good roll and to set rear camber perfectly. I ran 18x10.5 +10 on the rear on mine with a 275/40-18 , currently I have the same setup with a 285/35-18. I plugged in the specs and here is what we have
My 285's are a lot wider than the 275/40 I ran before
My 285's are a lot wider than the 275/40 I ran before
Last edited by terrasmak; 01-28-2016 at 11:08 AM.
#86
I think the wheels are 21lbs, never weighed them before mounting.
I do not have the OEM Brembos so I am not sure if they would fit over them or not.
I am running 10mm spacers all around with Extended wheel studs.
Specs without spacers: 18x9.5 +10, 18x11 +8
Tires: 255/40/18, 225/40/18
I do not have the OEM Brembos so I am not sure if they would fit over them or not.
I am running 10mm spacers all around with Extended wheel studs.
Specs without spacers: 18x9.5 +10, 18x11 +8
Tires: 255/40/18, 225/40/18
The following 8 users liked this post by Bmurray350z:
A-Town-Z (03-20-2018),
AustinAshZ (03-28-2024),
aviate (04-11-2018),
BluestreamDE (12-11-2016),
JoeFoe (01-28-2017),
and 3 others liked this post.
#90
350Z/370Z Tech Moderator
MY350Z.COM
MY350Z.COM
Joined: Oct 2014
Posts: 10,137
Likes: 3,305
From: Northern California
Was shopping for some extended lugs on Fleabay the other day and more than half of the lugs that came up in the search were these pointy things.
Had to ask myself "Who buys those besides James Bond?"
I woulda got those but I already got this option on my car that serves the same purpose...
Had to ask myself "Who buys those besides James Bond?"
I woulda got those but I already got this option on my car that serves the same purpose...
#92
Well finally broke down and got the wheels and I have to say I'm pretty happy with them. I didn't get the fenders rolled and so far so good. Everything fit pretty good. They do stick out a bit but I kinda like the way it looks. I do kinda wish there was a color between the gold and the bronze because they're pretty loud. Overall the car does ride better (probably because my tires were bald lol). I went with BF Goodrich g-force comp 2''s. 275/40/18 in the back and 245/40/18 for the front.
#93
Tires
ok so i want to get the Cosmis XT-206R 18x9.5 front and for the back 18x11 but i dont know what tires to get or how much they will be can anyone throw me in the right way of tires adn what are some good ones that are not too expensive.
#94
do you know If this applies to the xt006s? I have xt006's now and in the process of doing a brembo conversion and it doesn't clear, my current size is 18x9.5 +10 18x11 +8 , but the design of the spoke seems to be concave more than xt206 so I was hoping to run some spacers but not sure which size, thinking about getting some clean fenders to make up for the poke as well..
Last edited by Lifessimple; 07-05-2018 at 03:32 AM.
#96
I ended up clearing, I just installed the oem brembos yesterday, I used washers to measure the clearance I'd need for the fronts and measured at 14.3mm, bought a 15mm spacer for the front only and cleared perfectly without really much of a poke. Rears fit without modification. Running xt006r 18x9.5 +10/11 + 8
Last edited by Lifessimple; 07-22-2018 at 07:18 PM.
#97
Before anyone quotes, yes the caliper is the wrong side because the bleeders are facing down, I got 2 of the same sides by accident (junk yards fault not mine) and didn't want to wait so I DID BLEED THEM right side up. =D
Last edited by Lifessimple; 07-23-2018 at 11:35 AM.
#98
XT-006r 18x9.5 +10 Federal 595 RSRR 275/35/18 square setup on NON Brembo’s
BC DR series true coilovers. SPL front upper control arms, I can’t remember of the camber degree in the front but it’s not much. No spacer in the front and a 5mm in the rear. Front and rear fenders are rolled. Zero rub. I’ve got Brembo’s to put on but need 15mm spacer the clear the fronts. Not sure if I’ll be ok with the poke. I’ll post updated pics with the Brembo’s when I get those on. If I don’t like it, these will more than likely be for sale.
Last edited by ZBABE1; 09-10-2018 at 08:36 AM.
The following 3 users liked this post by ZBABE1:
The following users liked this post:
BluestreamDE (11-13-2018)
#100
350Z/370Z Tech Moderator
MY350Z.COM
MY350Z.COM
Joined: Oct 2014
Posts: 10,137
Likes: 3,305
From: Northern California
Chameleon car... looks white in the "Aggressive" thread. Hahaha. ( https://my350z.com/forum/wheels-and-...l#post10976580 )
Last edited by MicVelo; 11-13-2018 at 07:09 AM.