Hey there,

I'm just looking through these forums trying to see what's required with this setup...

18x9.5 +22 275 tire (front)
18x10.5 +22 295 tire (back)

I'm sure I'll have to fender roll as it says BUT is that all? I want to be able to do this setup without going wide bodykit because I like the bodykit I have. I don't mind if wheels are sticking out under fenders.

 

That's my setup, but 265/35/18 fr and 295/35/18 rr. Mine are +12, backs are rolled. Auto Xers run 275 square, pretty sure you'll be fine.

 

Your desired tire sizing is pretty aggressive at +22 offset but it'll "probably" work with a little prep. (Although I have had 295/40 on the rear without any issues - but on a less aggressive offset pair of rear wheels.)

Generally speaking, on a lowered car, the "typical" 18" set-up is 255/40 & 285/40 (or 245/275).

In addition to rolling rear lip, you'll likely need to cut down the front fender liner bolt.

This is the 255/35 & 285/35 on same size/offset wheels (19s, but all other measurements - heights, widths, offset, the same...)



Lowered 19mm, rear fenders full rolled, front fender bolt UNcut, NO spacers)