I am looking for recommendations on 18" wheels that I can run a 275/35/18 square set up without fender rolling or spacers. Must be able to clear the brembo brakes.


I have searched and search, looked at many different options, but no definitive answer.

Thanks,

Brad

 

Why are you looking at a square setup? Racing?

Mic is the tire/wheel man here...I'm sure you'll be hearing from him

 

RPF1 in 18x10.5 in the common and works great, but the rear fenders will need a slight roll.

You can drop to the 18x9.5 +15 and be fine without rolling

Personally I would buy a wheel with a width less then 10

 

Concur. ^^^ I'd go with RPF1 (or other Enkei "Race" wheel for a track-oriented car per the title.)

But, just my experience, I had to roll rears to take the occasional bump out of the back end with the 9.5 +15s but with 275/40 (nearly exact same rolling diameter as OE fit tires), not the 35s, which may work per terrasmak's recommend.

 

Right, caught that post post

 

just as an example. My enkei RS05RR

front: 10" ET +12 - tire 265/35/18. camber -2 = no fender work (285 0r 275 did not work
for me) cleared brembo by 2mm.

Rear: 10.5" ET 15 - tire 295/35/18 camber -2 - no fender work. cleared brembo

so I am pretty sure you can do 10" ET +15 tires 265/35/18 all around without fender work and some camber.


I am only dropped .75