Axis Milano 19x8.5 (40mm) 19x9.5(45mm)
#2
Registered User
iTrader: (1)
Join Date: Dec 2002
Location: Bay Area to Vancouver BC
Posts: 1,280
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Looks cool I love these wheels on the Z. I'd suggest some spacers however just to push the wheels out to the corners more. It will make a huge difference visually. Just my 2 cents but again it's looking cool!
#3
Registered User
iTrader: (1)
Join Date: May 2002
Location: Dallas, Tx
Posts: 1,460
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Just curious, but why did you pick that offset? I love these wheels and am trying to find a good deal on them, but I'm waiting on offset info. I know +35 is available (wouldn't look as tucked as the setup you went with) and was going to order those.
I also read somewhere that Axis has an offset package for 350z's and 5series beamers that is like +15 and +20. Or something like that. I'm waiting on an email back from Axis before I order to find out if that offere exists and if I can fit it with my car being SO dropped.
Looks good
Take care.
I also read somewhere that Axis has an offset package for 350z's and 5series beamers that is like +15 and +20. Or something like that. I'm waiting on an email back from Axis before I order to find out if that offere exists and if I can fit it with my car being SO dropped.
Looks good
Take care.
#5
Registered User
Thread Starter
iTrader: (1)
Join Date: Oct 2003
Location: Vero Beach,FL
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
the 15/20mm offset is currently on 4 wk backorder, northeast auto design suggested this offset, but we wont get into the situation with them,they dont look bad but i think i will get some spacers, just to fill them a bit more, thanks for your compliments, any suggestion on what size spacers to go with, i do wanna lower the car on tein springs
#6
Registered User
iTrader: (1)
Join Date: Dec 2002
Location: Bay Area to Vancouver BC
Posts: 1,280
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Hmmm, well I've seen lots of TE-37's in the size you are running at +22 all around. This looks pretty aggressive. Personally running a +22 all around setup but have 9.5 fronts and 10.5 inch the rears and I'm very happy with the look (required fender rolling though). Good luck!
#7
Registered User
Join Date: Jan 2003
Location: Coppell, Texas
Posts: 581
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
I was looking into that as well. I find this one guy on net that sells them in +15 and +20 offset. But I'm not sure if he has it in stock or not?
The one that we offer on ebay is non staggered, which is 19x8.5 all around. For your car the best setup 19x8.5 with +15 offset and 19x9.5 with +20 offset. The price for staggered setup is $1,500 shipped. Let me know if you are interested. To order directly, you can contact us at 310.329.8998. Thanks
Tim K
EuroTronik
The one that we offer on ebay is non staggered, which is 19x8.5 all around. For your car the best setup 19x8.5 with +15 offset and 19x9.5 with +20 offset. The price for staggered setup is $1,500 shipped. Let me know if you are interested. To order directly, you can contact us at 310.329.8998. Thanks
Tim K
EuroTronik
Trending Topics
#9
Registered User
Join Date: Jul 2003
Location: los angeles
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
![Lightbulb](https://my350z.com/forum/images/icons/icon3.gif)
hey, do you have ne pics of your wheels on your car? i am looking to buy these myself as they are the best combination of looks/lip size for teh price? my email is ppak3@ucla.edu or post it here if u can also? thanks
#10
Registered User
Join Date: Apr 2003
Location: Blue Steel
Posts: 1,391
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Hey.. those are the wheels I am getting. I am waiting on the 15/20s though. Supposedly I am getting the first set from Northeast Auto Design. Cant wait! I love em!
#12
Registered User
Thread Starter
iTrader: (1)
Join Date: Oct 2003
Location: Vero Beach,FL
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
here are some more pics, i think people are seein the wheels sittin in so far cause of the camber, the bottom portion of the wheel actually sits barely outside the fender well, but anyways here are some other pics
![](http://www.mustangmods.com/data/8070/picture_002.jpg )
![](http://www.mustangmods.com/data/8070/untitled.jpg )
![](http://www.mustangmods.com/data/8070/untitled4.jpg)
#13
Registered User
iTrader: (1)
Join Date: May 2002
Location: Dallas, Tx
Posts: 1,460
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Pics look good. For all interested......here is the communications I got from Spy Engineering regarding the Low offset for the 350. I think I'm going to contact North East Auto Design about the low offsets becasue the info Spy engineering is giving me contradicts what I've read. ( I think he may have just been trying to get the quick sale, and scimped on the details) Anyway, here goes.
From: Joshua Cole
Sent: Tuesday, March 02, 2004 6:21 AM
To: info@axiswheels.com
Subject: Size info for the Axis 350z
I'm certain they are a staggered 19x8.5 and 19x9.5 set of Axis Milanos. but what are the offsets? looks to be lower than the +35 offered. I've heard rumors of an offset designed for the the 350z. Any info is appreciated as I want to order a set this week.
Thanks
Josh
--------------------------------------------------------------------
Josh-
Your message to Axis wheels has been forwarded to us, we are SPY ENGINEERING, the largest Axis distributor in the country. We offer all Axis wheels and wheel & tire packages mounted & balanced & shipped to your door.
To answer your specific questions:
1) Currently Axis is not offering the LOW offset for the 350Z yet,
however, the 35mm front offset looks awesome and suits the car nicely.
2) We have the Milanos in stock and ready to ship.
3) We offer wheel & tire packages mounted & balanced & shipped to your door!
Click here for more info on the Axis Milano wheels:
> http://www.spyeng.com/spy/milano.html
--------------------------------------------------------------
From: Joshua Cole
To: <sales@spyeng.com>
Sent: Tuesday, March 02, 2004 12:38 PM
Subject: RE: Size info for Axis 350z
When can I expect to see the LOW offset available? It's been discussed for months now. I'm just not sure the 35mm offset is the look I want. I'm sure it looks fine for the fronts, but the rear might be a little tucked
Thanks in advance
----------------------------------------------------------------
Joshua-
The low offset would only be available for the fronts if anything. The rear offset is (and has never been) an issue.
Thank you for choosing SPY ENGINEERING. We pride ourselves on quality throughout the process.
All wheel & tire packages include our WORLD CLASS services below:
- scratch free mounting on our Hunter TC 3500
- high speed balancing
- load balancing using "force variation" to learn more click below
www.gsp9700.com
- every tire and wheel is labeled and marked for each position on the
vehicle for best performance
- waxed wheels
- dressed tires
- chrome valve stems
- FREE Fed Ex Ground shipping to your door
Kind regards,
Derek
SPY ENGINEERING, INC.
8656 Production Avenue
San Diego, CA 92121
TOLL-FREE (866) 546-5195
www.spyeng.com
sales@spyeng.com
From: Joshua Cole
Sent: Tuesday, March 02, 2004 6:21 AM
To: info@axiswheels.com
Subject: Size info for the Axis 350z
I'm certain they are a staggered 19x8.5 and 19x9.5 set of Axis Milanos. but what are the offsets? looks to be lower than the +35 offered. I've heard rumors of an offset designed for the the 350z. Any info is appreciated as I want to order a set this week.
Thanks
Josh
--------------------------------------------------------------------
Josh-
Your message to Axis wheels has been forwarded to us, we are SPY ENGINEERING, the largest Axis distributor in the country. We offer all Axis wheels and wheel & tire packages mounted & balanced & shipped to your door.
To answer your specific questions:
1) Currently Axis is not offering the LOW offset for the 350Z yet,
however, the 35mm front offset looks awesome and suits the car nicely.
2) We have the Milanos in stock and ready to ship.
3) We offer wheel & tire packages mounted & balanced & shipped to your door!
Click here for more info on the Axis Milano wheels:
> http://www.spyeng.com/spy/milano.html
--------------------------------------------------------------
From: Joshua Cole
To: <sales@spyeng.com>
Sent: Tuesday, March 02, 2004 12:38 PM
Subject: RE: Size info for Axis 350z
When can I expect to see the LOW offset available? It's been discussed for months now. I'm just not sure the 35mm offset is the look I want. I'm sure it looks fine for the fronts, but the rear might be a little tucked
Thanks in advance
----------------------------------------------------------------
Joshua-
The low offset would only be available for the fronts if anything. The rear offset is (and has never been) an issue.
Thank you for choosing SPY ENGINEERING. We pride ourselves on quality throughout the process.
All wheel & tire packages include our WORLD CLASS services below:
- scratch free mounting on our Hunter TC 3500
- high speed balancing
- load balancing using "force variation" to learn more click below
www.gsp9700.com
- every tire and wheel is labeled and marked for each position on the
vehicle for best performance
- waxed wheels
- dressed tires
- chrome valve stems
- FREE Fed Ex Ground shipping to your door
Kind regards,
Derek
SPY ENGINEERING, INC.
8656 Production Avenue
San Diego, CA 92121
TOLL-FREE (866) 546-5195
www.spyeng.com
sales@spyeng.com
#14
Registered User
iTrader: (1)
Join Date: May 2002
Location: Dallas, Tx
Posts: 1,460
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Now, to clarify... a 15/20mm offset package is coming for the 350z...? Being that these are 8.5" and 9.5" widths, is that to aggressive for a car that is dropped 1.5" inches all the way around?
Might I be better off with the 8.5 and 9.5 with a +35mm offset at all corners? how does this look compared to stock offsets?
any insight from you guys would be greatly appreciated. I've been diggin these wheels, glad to see others are finally catching on. All responses I was getting was "They belong on a luxury Sedan" I think they hold there own on the Z nicely.
again, any advice is appreciated.
Might I be better off with the 8.5 and 9.5 with a +35mm offset at all corners? how does this look compared to stock offsets?
any insight from you guys would be greatly appreciated. I've been diggin these wheels, glad to see others are finally catching on. All responses I was getting was "They belong on a luxury Sedan" I think they hold there own on the Z nicely.
again, any advice is appreciated.
#15
iTrader: (1)
Join Date: May 2002
Location: Plano (Dallas), TX
Posts: 671
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally posted by ColecatZ
Now, to clarify... a 15/20mm offset package is coming for the 350z...? Being that these are 8.5" and 9.5" widths, is that to aggressive for a car that is dropped 1.5" inches all the way around?
Might I be better off with the 8.5 and 9.5 with a +35mm offset at all corners? how does this look compared to stock offsets?
any insight from you guys would be greatly appreciated. I've been diggin these wheels, glad to see others are finally catching on. All responses I was getting was "They belong on a luxury Sedan" I think they hold there own on the Z nicely.
again, any advice is appreciated.
Now, to clarify... a 15/20mm offset package is coming for the 350z...? Being that these are 8.5" and 9.5" widths, is that to aggressive for a car that is dropped 1.5" inches all the way around?
Might I be better off with the 8.5 and 9.5 with a +35mm offset at all corners? how does this look compared to stock offsets?
any insight from you guys would be greatly appreciated. I've been diggin these wheels, glad to see others are finally catching on. All responses I was getting was "They belong on a luxury Sedan" I think they hold there own on the Z nicely.
again, any advice is appreciated.
I think the wheels look sweet, but I think I would push Axis to make a 22-28mm offset to accomodate the Z.
If you were to use spacers I would go with 8-10mm spacers with longer Nismo studs. Although, I think I would wait for wheels with the proper offset. I am sure it is hard to wait when you want the wheels though.
#16
![Default](https://my350z.com/forum/images/icons/icon1.gif)
In order to get the special +15/+20 offset. You have to buy the BMW 5 series wheels, then have AXIS custom drill them for you to fit the 350z/g35 bolt pattern. It costs 20 bucks extra a wheel. I got my wheels 10 days after ordering, and I live on the east coast too. I think I'm the only one in the country with these custom offsets. When I initially ordered my wheels, 5 months ago. They told me that AXIS was currently working on a 350z offset and they didn't know when it would be released. I couldn't wait that long, so I asked if they had any other solution. THey said they could custom drill them for me, and thats exactly what I did. 5 months later, still no signs of the 350Z offset being avaliable. I'm glad I payed the extra $20 bucks to get the right offset to fit over the Brembo's.
Last edited by dollar99; 03-03-2004 at 02:32 PM.
#17
Registered User
iTrader: (1)
Join Date: May 2002
Location: Dallas, Tx
Posts: 1,460
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Hey Dollar, I think we talked in brief about this before....thanks for clarifying. I know the Axis car is lowered, as is mine, and I want that same look, but my guess is they probably used spacers. Have you dropped your car with the +15/+20 setup? More importantly....any pics? Would LOVE to see them on the car.
I'm shooting for this... (old pic)
I'm shooting for this... (old pic)
#18
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Bought mine from east coast around three months ago....cant remember the offsets though. but they fill up the wheel wells really well.
axsis offsets 19x8.5..15,35,40,47....9.5...20,40,45.
ZZZZZZZZZZZZZyalater
axsis offsets 19x8.5..15,35,40,47....9.5...20,40,45.
ZZZZZZZZZZZZZyalater
#19
Registered User
iTrader: (1)
Join Date: May 2002
Location: Dallas, Tx
Posts: 1,460
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Argh, I want to order.....but I'm lowered and am unsure what offset to choose.
Will, from the pic yours look good, any other pics so maybe we could determine what offsets sit where.....in relation to the fenders. You guys made a great choice on wheels by the way.... Hopeing mine will look nice ....with the big drop and all.
Will, from the pic yours look good, any other pics so maybe we could determine what offsets sit where.....in relation to the fenders. You guys made a great choice on wheels by the way.... Hopeing mine will look nice ....with the big drop and all.
#20
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally posted by ColecatZ
Argh, I want to order.....but I'm lowered and am unsure what offset to choose.
Will, from the pic yours look good, any other pics so maybe we could determine what offsets sit where.....in relation to the fenders. You guys made a great choice on wheels by the way.... Hopeing mine will look nice ....with the big drop and all.
Argh, I want to order.....but I'm lowered and am unsure what offset to choose.
Will, from the pic yours look good, any other pics so maybe we could determine what offsets sit where.....in relation to the fenders. You guys made a great choice on wheels by the way.... Hopeing mine will look nice ....with the big drop and all.
Last edited by dollar99; 03-03-2004 at 03:27 PM.