stx

I had a flat tire and when I put it back on, the front and rear were swapped on the display. I would like to put the front reading on the front display and rear on rear display. Does anyone know how to do this without a consult II?

zipman

let the tire pressure cool down to reg temp,then take off the tires and the remount the tires this should reset your sensors

MonkeyBoy

If that does not work, then you will have to go to a Nissan dealearship and have them resynch them.

stx

Thanks, I will give that a shot.

I don't want to take the car back to the dealer since he will charge me.

Strife350z

iTrader: (4)

are you sure that works? I was told that the TPS sensors do not reset on their own... even if you remove them from the wheel and remount them

jackwhale

My tires have been remounted twice and the pressure sensors worked as usual each time...didn't have to reset them.

stx

The only reason I noticed TPS where being displayed wrong is because the rear tire I had repaired only had 30 psi. The rest of my tires had 35 psi and my display showed the 30 psi on the front not rear. So I lowered other rear tire to 30 psi and both tire pressures for the rear were displayed on the front.