4 SSR Type C RS 17x8.5 +35 5x114.3
11-24-2010, 10:06 AM
#1
4 SSR Type C RS 17x8.5 +35 5x114.3
Wheels are nearly perfect, just one minor nick on one wheel (shown up close in the photos). You can barely see it unless looking for it, and could be touched up pretty easily. Centering rings included, no lug nuts. Wheels are still perfectly round and free of other blemishes. I didn't clean them for the photos and they still look pretty good. They look great cleaned up.
Mostly worn-out but still usable 255/40/17 Kumho XS tires can be included or unmounted at buyer's preference.
$1100 OBO plus shipping & PayPal fees. Wheels are located in Little Rock, AR, 72211.
Mostly worn-out but still usable 255/40/17 Kumho XS tires can be included or unmounted at buyer's preference.
$1100 OBO plus shipping & PayPal fees. Wheels are located in Little Rock, AR, 72211.
11-24-2010, 10:20 AM
#2
Registered User
Join Date: Aug 2010
Location: CA
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
bump for some badass track wheels that weight like 16lbs each! I checked SSR's website and didn't see the +35 offset in the 17x8.5. Was this something that was bought when they used to sell through tire rack?
http://www.ssr-wheels.com/wheels/whe...=500&width=700
http://www.ssr-wheels.com/wheels/whe...=500&width=700
11-24-2010, 10:33 AM
#5
If you look they're also marked 4x100 and others--they use one mold for all the faces and just drill them different depending on application. It also says 5x114.3 elsewhere on the wheel.
The +35 offset isn't listed because they don't make this exact model anymore. They fit the Z perfectly, though.
Weight is very light at around 16.9 lbs each.
The +35 offset isn't listed because they don't make this exact model anymore. They fit the Z perfectly, though.
Weight is very light at around 16.9 lbs each.
Trending Topics
03-15-2011, 10:19 PM
#11
Registered User
Join Date: Oct 2006
Location: San Antonio
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
03-16-2011, 08:03 AM
#13
If you look they're also marked 4x100 and others--they use one mold for all the faces and just drill them different depending on application. It also says 5x114.3 elsewhere on the wheel.
The +35 offset isn't listed because they don't make this exact model anymore. They fit the Z perfectly, though.
Weight is very light at around 16.9 lbs each.
The +35 offset isn't listed because they don't make this exact model anymore. They fit the Z perfectly, though.
Weight is very light at around 16.9 lbs each.
Very tempted.
Thread
Thread Starter
Forum
Replies
Last Post
abarclay
South East Marketplace
8
09-21-2015 01:55 PM
