FS: DPE CS5 (brand new!!) great deal!

Thread Tools

Search this Thread

Nov 14, 2011 | 08:05 AM

#21

HAVOK350Z

Thread Starter

New Member

iTrader: (2)

Joined: Jul 2006

Posts: 200

Likes: 0

From: HOUSTON,TEXAS

pull in -2 degrees camber and strecthed tires

Nov 14, 2011 | 06:55 PM

#22

whtewolf1

Registered User

Joined: Jan 2008

Posts: 59

Likes: 0

From: Texas City, TX

bump for good friend , and sick wheels

Nov 15, 2011 | 10:34 AM

#23

HAVOK350Z

Thread Starter

New Member

iTrader: (2)

Joined: Jul 2006

Posts: 200

Likes: 0

From: HOUSTON,TEXAS

ty good sir ^^

Nov 15, 2011 | 06:35 PM

#24

98intrigue

Registered User

iTrader: (16)

Joined: Dec 2004

Posts: 870

Likes: 0

From: Clearwater, FL

If only we were closer so I could test fit... I'd probably need too much camber :/

Nov 16, 2011 | 07:00 AM

#25

HAVOK350Z

Thread Starter

New Member

iTrader: (2)

Joined: Jul 2006

Posts: 200

Likes: 0

From: HOUSTON,TEXAS

-1.5 degrees to be exact, not that extreme ^^

Nov 16, 2011 | 07:17 AM

#26

98intrigue

Registered User

iTrader: (16)

Joined: Dec 2004

Posts: 870

Likes: 0

From: Clearwater, FL

Quote:

Originally Posted by HAVOK350Z

-1.5 degrees to be exact, not that extreme ^^

My fronts are 19x10 +26 and they rub on big dips. I'm at -2.9 camber in the front. With your negative offsets, these would stick out 1" from where mine are at. I think I'd need more than -1.9 camber?

Nov 16, 2011 | 08:49 AM

#27

4SHIZZIL

New Member

iTrader: (10)

Joined: Mar 2006

Posts: 4,410

Likes: 9

From: NOVA, Richmond, DC, MD, St.L

yeah im so on the fence about going that wide too. But there is always fender flares!

same havok from dc a few years back?

Nov 16, 2011 | 12:11 PM

#28

HAVOK350Z

Thread Starter

New Member

iTrader: (2)

Joined: Jul 2006

Posts: 200

Likes: 0

From: HOUSTON,TEXAS

Quote:

Originally Posted by 98intrigue

My fronts are 19x10 +26 and they rub on big dips. I'm at -2.9 camber in the front. With your negative offsets, these would stick out 1" from where mine are at. I think I'd need more than -1.9 camber?

hmmm, my buddy just did his z with some crazier offsets, and had that much camber pulled in, looked great, ill ask him again to make sure I wasnt hearing things ^_^

Last edited by HAVOK350Z; Nov 16, 2011 at 12:29 PM.

Nov 19, 2011 | 08:29 AM

#29

HAVOK350Z

Thread Starter

New Member

iTrader: (2)

Joined: Jul 2006

Posts: 200

Likes: 0

From: HOUSTON,TEXAS

tons of emails and txts, still up for grabs... I wont hold these for the people who keep asking, first one with $$ gets them

Nov 19, 2011 | 11:00 AM

#30

98intrigue

Registered User

iTrader: (16)

Joined: Dec 2004

Posts: 870

Likes: 0

From: Clearwater, FL

Just making sure... your specs are negative offsets, correct? That (-) symbol isn't there just to separate the widths from the offsets.

Nov 19, 2011 | 03:26 PM

#31

HAVOK350Z

Thread Starter

New Member

iTrader: (2)

Joined: Jul 2006

Posts: 200

Likes: 0

From: HOUSTON,TEXAS

yes sir you are correct, I thought the fronts where -15 but they are -5 all around ....forgot to add that.

Nov 19, 2011 | 09:49 PM

#32

ducky

Registered User

iTrader: (2)

Joined: Jul 2002

Posts: 220

Likes: 0

From: Las Vegas

Sick wheels!!! I would so buy this!!! Just waiting for my fab stuff to sell....when and if it does and you still have this, I'm all over it...subscribed

AWEsome NSX and wheels!!!