FS/FT: r1 racing forged 3 piece wheels powder coated blue
#1
r1 racing forged 3 piece wheels powder coated blue
So i have my wheels up for sale/trade today.
specs: 19x10 with 19/35/265 and 19x9 with 19/35/245 bridge stone potenza's re050.
They were blue with a chrome lip then my guy who powder coated them chipped the lips so powder coated the lips a gunmetal grey with sparkles.
No road rash and have warrantee on the powder coat that is transferable.
The wheels weigh about 23 lbs a piece so very light wheels for 19's and most likely if lowered you will need your fenders rolled. I don't know the offset but check by the pictures on fitment. any trades offer up worst i can say is no.
Btw anything that looks like blemishes in the pics aren't it is brake dust since I'm running very soft pads, and the red lugs are because my extended studs up front and my other lugs wouldn't fit.
Before the lips got messed up
verification
before powder coat
Disassembly
Before tires
Mounted
specs: 19x10 with 19/35/265 and 19x9 with 19/35/245 bridge stone potenza's re050.
They were blue with a chrome lip then my guy who powder coated them chipped the lips so powder coated the lips a gunmetal grey with sparkles.
No road rash and have warrantee on the powder coat that is transferable.
The wheels weigh about 23 lbs a piece so very light wheels for 19's and most likely if lowered you will need your fenders rolled. I don't know the offset but check by the pictures on fitment. any trades offer up worst i can say is no.
Btw anything that looks like blemishes in the pics aren't it is brake dust since I'm running very soft pads, and the red lugs are because my extended studs up front and my other lugs wouldn't fit.
Before the lips got messed up
verification
before powder coat
Disassembly
Before tires
Mounted
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
CFAUVEL
Exterior & Interior
3
10-01-2015 04:20 PM