FS: '03 350z track TT built
http://albuquerque.craigslist.org/cto/2204363445.html
Low miles, tons of mods, I have ~20k in receipts alone. 425 rwhp on 5lbs. of boost. Just need to modify the fuel system to increase boost and HP.
Low miles, tons of mods, I have ~20k in receipts alone. 425 rwhp on 5lbs. of boost. Just need to modify the fuel system to increase boost and HP.
No problem, here is the parts list. I'm currently using the Greddy e-manage, I'll also include the software and interface cable. I also have the stock exhaust. Just replaced the brake pads and it's now in the shop getting new belts and valve cover gaskets...car is very well taken care of.
-MOTOR:
Wiseco Pistons .020 over
Eagle/SCAT H Beam Rods
ARP Rod Bolts
Block inspected and cleaned
Block redecked
Block Bored and Honed using a Torque Plate
Rotating assembly balanced
Crank magnafluxed and the journals micro-polished
New Moly coated Race Spec main bearings installed
New Moly coated Race Spec rod bearings installed
Block prepped and assembled
New OEM Head Gaskets
Heads inspected and cleaned
Heads redecked
Ported exhaust and intake runners
3 angle valve job
New OEM Valve stem seals installed
Valve Stem Heights set
Cold Clearance set for stock cams
Heads prepped and assembled
New OEM Rev-up Oil Pump
Brembo brake kit
Big rotors
-Exhuast:
Greddy true dual Turbo Ti-C exhaust
350z motoring test pipes
-Turbo:
Greddy twin turbo kit w/ front mount intercooler
Greddy pro-fec B spec-II boost controller
Greddy boost gauge
Greddy Temp. gauge
Greddy Full auto turbo timer
-Interior:
Full LED swap
Poineer CD player
Tuned by motiva (motivaperformance.com) , built and maintained by NMImports (nmimports.com)
-MOTOR:
Wiseco Pistons .020 over
Eagle/SCAT H Beam Rods
ARP Rod Bolts
Block inspected and cleaned
Block redecked
Block Bored and Honed using a Torque Plate
Rotating assembly balanced
Crank magnafluxed and the journals micro-polished
New Moly coated Race Spec main bearings installed
New Moly coated Race Spec rod bearings installed
Block prepped and assembled
New OEM Head Gaskets
Heads inspected and cleaned
Heads redecked
Ported exhaust and intake runners
3 angle valve job
New OEM Valve stem seals installed
Valve Stem Heights set
Cold Clearance set for stock cams
Heads prepped and assembled
New OEM Rev-up Oil Pump
Brembo brake kit
Big rotors
-Exhuast:
Greddy true dual Turbo Ti-C exhaust
350z motoring test pipes
-Turbo:
Greddy twin turbo kit w/ front mount intercooler
Greddy pro-fec B spec-II boost controller
Greddy boost gauge
Greddy Temp. gauge
Greddy Full auto turbo timer
-Interior:
Full LED swap
Poineer CD player
Tuned by motiva (motivaperformance.com) , built and maintained by NMImports (nmimports.com)
Forgot to mention....asking 25k. No part outs. Motor built by Kyle @ importpartspro. Car garage kept.
Videos here, these were taken before removing the silencers.
http://www.youtube.com/watch?v=cWcKFm4kcZs
http://www.youtube.com/watch?v=S8LsfpOfNWE
http://www.youtube.com/watch?v=sXmKNNlsmRU
http://www.youtube.com/watch?v=mGBNkzL_K2w
Videos here, these were taken before removing the silencers.
http://www.youtube.com/watch?v=cWcKFm4kcZs
http://www.youtube.com/watch?v=S8LsfpOfNWE
http://www.youtube.com/watch?v=sXmKNNlsmRU
http://www.youtube.com/watch?v=mGBNkzL_K2w




