Will my new rims fit?
I wanna get some enkei t6r rims, staggered 18×8 38 in front and 18×9.5 40 in the rear,but I’m worried that the +38 offset in front is too much and might cause rubbing
and same thing with the +40 in…
By: smop01 | June 26, 2024
I wanna get some enkei t6r rims, staggered 18×8 38 in front and 18×9.5 40 in the rear,but I’m worried that the +38 offset in front is too much and might cause rubbing
and same thing with the +40 in…
By: smop01 | June 26, 2024
Need a 2003 engine wiring harness!!! Manual transmission!!!
some guy told me 04s would would for a 03 engine but they have wide and o2 sensors so it doesn’t work!!! Someone help!
By: Moe.chevy | June 26, 2024
Any idea why my caster is 9.5 in right and 8.9 in left .. I changed lower control arm and have z1 adjustable upper .. it was this was before those parts and same after
Image:…
By: Plusdaddy | June 25, 2024
Hi everyone
Just got my car(2003 nissan 350z. Japan import) a couple days ago. Of which the error came up when starting then would go after driving for 10 mins in limp mode. now it comes up when I’m…
By: ALEXLIVE | June 25, 2024
Hello everyone,
Recently, my Z has started having this weird rattle/clunk noise at startup. After doing some research, many people have had the same issue, suggesting that it’s possibly the slack…
By: Someone12132 | June 20, 2024
So I have a 2004 350z engine atm and I have been looking to find a 350z I can swap it into since the one I have now is just done for due to a front end collision. However, the engine ended up making…
By: Be__a | June 20, 2024
Hi,
I recently swapped my chassis wiring harness on my 350zHR because the old one was having issues due to a security system that the previous owner wired in. Before the swap, the car started right…
By: shoonmagoon | June 19, 2024