ZEnclosures Door Speaker Spacers Back in Stock

[mlg9770]

ZEnclosures Door Speaker Spacers Back in Stock....




NISSAN INFINITI SPEAKER SPACERS 350Z G35 FX35 AND MORE

CNC Cut!!!!

Please call 1-941-914-0859 for questions or to pay by Visa/Mastercard.

Paypal.... zenclosures@tampabay.rr.com

$20.00 per pair + $7.00 shipping


Spacers are needed to fit aftermarket speakers in many Nissan and Infiniti vehicles.

These speaker spacers will work in the 350Z & G35. We have been told by customers that they will work in the Sentra, FX 35, M35, M45, and more.

MDF Constructed 1" thick.
Uses factory predrilled holes for mounting
Comes with mounting hardware...nuts, bolts, washers, and lock washers.

Important...Please read
Please specify hole size on payment. Different brand speakers require a different size center hole.......Please specify hole size. We have these spacers available with 5.00", 5.25", 5.50", and 5.75" center mounting holes to accomodate 6.5" door speaker.

Thanks Mike

If center hole size is not specified you will receive a pair with a 5" center hole.

[Dieselinvasian]

these spacers ended up workign perfect with my infinity kappa setup -- such a good guy to deal with ..FTW!

[jmark]

Mike, Could I get your opinion on these speakers using your spacers?

Thanks!

Quote:
Originally Posted by jmark
What about Polk Audio db6501's mounted in the front doors of the Z?

Here is a pdf with the Polk Audio DB6501 dimensions. Anyone able to look at this pdf and say if they will fit in a 07 with a spacer? Not sure about the tweeter dimensions.....

http://www.polkaudio.com/downloads/d...inedrawing.pdf

[mlg9770]

Originally Posted by jmark

Mike, Could I get your opinion on these speakers using your spacers?

Thanks!

Quote:
Originally Posted by jmark
What about Polk Audio db6501's mounted in the front doors of the Z?

Here is a pdf with the Polk Audio DB6501 dimensions. Anyone able to look at this pdf and say if they will fit in a 07 with a spacer? Not sure about the tweeter dimensions.....

http://www.polkaudio.com/downloads/d...inedrawing.pdf

These polks should work out fine using our spacer with the 5.00" mounting hole. Since they are less than 2 inches deep you won't have any issues with the window hitting the magnet.

thanks mike

[jmark]

^ Mike, Do you sell any speakers with your spacers for install in the OEM location?

[mlg9770]

Originally Posted by jmark

^ Mike, Do you sell any speakers with your spacers for install in the OEM location?

At this time we don't have any speakers. It is in the works though.....

thanks mike

[bigbgballz]

Originally Posted by mlg9770

These polks should work out fine using our spacer with the 5.00" mounting hole. Since they are less than 2 inches deep you won't have any issues with the window hitting the magnet.

thanks mike

I have read that is you can squeze up to 2 7/8" without spacer. Can you confirm on that or max its 2" before its hits the window. Thanks in advance.

[mlg9770]

Originally Posted by bigbgballz

I have read that is you can squeze up to 2 7/8" without spacer. Can you confirm on that or max its 2" before its hits the window. Thanks in advance.

2 7/8" without a spacer won't work.......In my Z I mounted my speakers with the spacers using speakers a little over 2.50" deep and they still rubbed the window. I ended up shimming the front of the spacer to get clear of the window.

If you're using speakers 2.00" deep you will be fine when using the spacers. Its when you use speakers 2.50" deep or more when you starting having issues.

thanks mike

[bigbgballz]

Originally Posted by mlg9770

2 7/8" without a spacer won't work.......In my Z I mounted my speakers with the spacers using speakers a little over 2.50" deep and they still rubbed the window. I ended up shimming the front of the spacer to get clear of the window.

If you're using speakers 2.00" deep you will be fine when using the spacers. Its when you use speakers 2.50" deep or more when you starting having issues.

thanks mike

Thank you for your responce as i am trying to figure out all the components I will need to install some speakers. Basiclly, any speaker with depth bigger than 2.5" depth will require little bit over 1" thick spacer!

[jmark]

Originally Posted by mlg9770

At this time we don't have any speakers. It is in the works though.....

thanks mike

Can you say which brand?

[mlg9770]

Originally Posted by jmark

Can you say which brand?

Not yet....sorry

[jmark]

Originally Posted by mlg9770

Not yet....sorry

That's OK. I am sure they'll be top quality. I am just starting to gather items for my stereo upgrade. I have the Clarion DXZ785USB HU and want some good front speakers to pair with it.

[myfirstzcar]

I have some alpine type r 6.5 speakers. Will they work with your spacers? Will I have to modify my door panels?

[mlg9770]

Originally Posted by myfirstzcar

I have some alpine type r 6.5 speakers. Will they work with your spacers? Will I have to modify my door panels?

I've never tried these speakers with the spacer but I would guess they would work without having to modify the panels.

Anyone tried this setup? If so, how did it work out?

Thanks Mike

[myfirstzcar]

That's my main concern since pods are $179 unfinished.
I would also like to have good door panels for when I sell the car, eventually.

[gu_z33]

i want to order these spacers but i dont know what size center hole i would need.
the mounting depths are Fronts: 2-3/16 in (56mm) Rears: 1-13/16 in (46.5mm)
lmk i would really like to order some soon!

[mlg9770]

Originally Posted by gu_z33

i want to order these spacers but i dont know what size center hole i would need.
the mounting depths are Fronts: 2-3/16 in (56mm) Rears: 1-13/16 in (46.5mm)
lmk i would really like to order some soon!

Just let us know the make and model of the speakers you're using and we can determine which spacers you'll need.
These spacers only work for the front doors of the 350z......Thanks Mike

[gu_z33]

they are kenwood KFC-P709PS

[mlg9770]

Originally Posted by gu_z33

they are kenwood KFC-P709PS

These speakers require the spacer with a 5.00" mounting hole. Thanks Mike

[05350ZR]

Could you tell me which size spacer I'd need for a set of Rockford Fosgate prime R1652-S? I'd like to order these ASAP. Thanks!