FS: StopTech BBK
05-12-2013, 09:14 PM
#1
Registered User
Thread Starter
iTrader: (1)
Join Date: Mar 2007
Location: Southern California
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
StopTech BBK
Asking $2800.
BBK was removed from my 2007 V36 Sedan and never tracked. Everything is included for installation: Calipers, Slotted Rotors, SS lines, Original Brackets and Street Pads (Centric Posiquiet).
I’ve always been happy with this set-up … no squealing, low dust and plenty of pad and rotor life left.
Price includes shipping within the continental US.
I've been told these will fit various Nissan / Infiniti models, so I leave it to the buyer to determine fit (or if different brackets are needed) knowing that these came off of my G35 sedan.
Installed:
Rear Closeup:
Front Closeup:
The pictures were downsized by Photobucket. Contact me if you want high res pictures.
BBK was removed from my 2007 V36 Sedan and never tracked. Everything is included for installation: Calipers, Slotted Rotors, SS lines, Original Brackets and Street Pads (Centric Posiquiet).
I’ve always been happy with this set-up … no squealing, low dust and plenty of pad and rotor life left.
Price includes shipping within the continental US.
I've been told these will fit various Nissan / Infiniti models, so I leave it to the buyer to determine fit (or if different brackets are needed) knowing that these came off of my G35 sedan.
Installed:
Rear Closeup:
Front Closeup:
The pictures were downsized by Photobucket. Contact me if you want high res pictures.
Last edited by terrycs; 06-24-2013 at 08:24 AM.
05-16-2013, 10:27 AM
#4
I don't think I'm that ambitious! 
GLWS
I spoke with StopTech a moment ago and it turns out the bracket and spacing won't fit my Z so a no go either way. Thanks anyway!
GLWS
I spoke with StopTech a moment ago and it turns out the bracket and spacing won't fit my Z so a no go either way. Thanks anyway!
Last edited by JPT0117; 05-16-2013 at 10:54 AM.
Trending Topics
06-05-2013, 07:49 PM
#8
Registered User
Thread Starter
iTrader: (1)
Join Date: Mar 2007
Location: Southern California
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
The components from my BBK are:
Front - 355mm x 32mm rotor / ST-40 Caliper
Rear – 328mm x 28mm rotor / ST-22 Caliper
Which are similar to some that are in this thread:
https://my350z.com/forum/brakes-and-...re-thread.html
I think the BBK will fit with some trimming of the rear dust shield (which I had to do on my car). I'll see if I can get someone from the above thread to comment here.
Front - 355mm x 32mm rotor / ST-40 Caliper
Rear – 328mm x 28mm rotor / ST-22 Caliper
Which are similar to some that are in this thread:
https://my350z.com/forum/brakes-and-...re-thread.html
I think the BBK will fit with some trimming of the rear dust shield (which I had to do on my car). I'll see if I can get someone from the above thread to comment here.
06-14-2013, 09:44 PM
#12
Registered User
Thread Starter
iTrader: (1)
Join Date: Mar 2007
Location: Southern California
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
Front Rotor Thickness:
Rear Rotor Thickness:
Rotor specs are:
Front - 355mm x 32mm rotor / ST-40 Caliper
Rear – 328mm x 28mm rotor / ST-22 Caliper
Since some potential buyers have asked, I just thought I'd show that the rotors are practically full thickness.
Rear Rotor Thickness:
Rotor specs are:
Front - 355mm x 32mm rotor / ST-40 Caliper
Rear – 328mm x 28mm rotor / ST-22 Caliper
Since some potential buyers have asked, I just thought I'd show that the rotors are practically full thickness.
Thread
Thread Starter
Forum
Replies
Last Post
Dark Knight
Wheels Tires
7
11-11-2015 08:40 PM