It was at HIN in Dulles, VA on 4/22, but I can't find ANY pics of it. I'd like to see up close pics of the CF roof, fender section, and a-pillar if possible. Anybody know where I can find some?

 

http://mastergrade.net/index.php?cPa...eaf19fbd485b56

 

Yeah I know about Mastergrade's car, I'm looking for pics of Injected Performance's Z though.

 

I'll post some pics up later today with some details... do you have any questions I can answer in the meantime.

 

Yeah just curious what had to be done? Was it simply stick on? How was the fitment? For the fenders, did you find some kind of overlay, or did you buy CF fenders and have them painted keeping the top CD? Any suggestions?

 

The roof overlay was just a sheet we had to add the epoxy, the pillars are full carbon but lack the clip mounts... only screw holes so they required some modification.

The fenders are an overlay... custom and a ***** to do. i did the overlays on the fenders with a high quality epoxy resin and then lots of clear. Our first choice was to get full CF fenders and paint up to our line, but we couldn't get a quality set since everyone offers them and noone actually stocks them...

My suggestion is to go with a high quality hood, fender and hatch... we used Seibon for the hood and hatch (and will probably end up with the fenders too). The hatch fit fine... the shocks are a little much for the lite CF but it works well. The hood on the green car is actually the second hood... the first didn't fit for ****... Seibon (VT-style) and it wouldn't even close... but the second hood (OEM style) fit great.

I don't think it was because of the style of hood it was just how it dried while curing... the VT seemed warped.

The MasterGrade roof and pillars are nice... our pillars were chipped up and needed some attention when we got them... and like I said they are NOT stock replacement. There is a row of chips under the stock pillar and the aren't there for the CF replacement...

Hope this helps....

 

Isn't Mastergrade dead?

 

Don't think so. They came out with a drift car this year. Haven't seen it run and I don't think there was a motor in it at SEMA.

 

I've heard they went out of business as well. They also haven't answered an e-mail from me...Their Z looks great!

 

They are hard to get a hold of. The carbon fiber we received took forever even after they said they shipped it 3 times but never did.

 

Sounds like a great company to deal with lol