Zmazing03

iTrader: (9)

Agree. Stock rotors/calipers (non BBK) with aftermarket pads do fine for any street driving. With Hawk pads, you can stop quicker than most cars on the road -- and they might rear end you (lol).

I vote for exhaust. Don't do headers if you are going FI in the future.

onedirtyz

iTrader: (3)

my jwt popcharger + motordyne 5/16ths iso-thermal plenum spacer ended up being roughly $440 including tax... you'll have plenty left over to spend on other things.
however if you're going turbo in less than a year it'd be stupid to put these in.

BallZdeepNYC

iTrader: (2)

im gettin a G. a BJ and shes letting me in for some AP. But besides that

Any advice on the better spacer? AAM or motordyne only reason i ask is due to running too lean in front 2 banks with motordyne

BallZdeepNYC

iTrader: (2)

I dont think i would do the iso thermal cause i really dont know when and why i would be turning valves in diffrent temps, etc. But until next year i would want some meaner sound and power i can always sell these parts to my fellow My350Zers in the future

BallZdeepNYC

iTrader: (2)

bump for self

abyss

Get some wheels and drop, that should always be the 1st mods. BBK would be a waste atm and if your going FI no point in getting the other mods.

Driven1

iTrader: (2)

Here's some Volks within your range. Therefore, my vote is rims and drop. I just wouldn't be so stuck on Volk. Nice wheels, but there are others that are equally nice and good looking IMO.
https://my350z.com/forum/showthread.php?t=272004

Abishop

iTrader: (19)

if your going fi in the future, don't buy the pop charger, Buy the spacer, buy a Utec, and start saving for the FI. The exhaust kinda depends on what FI route you want to go.

BallZdeepNYC

iTrader: (2)

Im not only stuck on volk but i do want a quality rim that is not as expensive and has a nice lip on rear in black with polished lip and 10.5 wide in the rear. If you can point me to a reputable deal with a rim that looks like that let me know

BallZdeepNYC

iTrader: (2)

I dont really know of any shop near me in upstate NY that can tune Utec but i posted in the regional cause i need some help

secretagent1

You say you're in NYC right?
https://my350z.com/forum/tuning/270128-mrc-does-another-great-tune.html
The search button is your friend.

terrasmak

iTrader: (8)

Get both , well kinda , just order the XO2 exhaust for only $600. More details are int he vender section.

SeOuLZ350

get HKS..
you will thank me later

___DJK___

iTrader: (2)

This is semi off topic, but if you are paying for mods out of a piggy bank (almost literally), FI may not be a good idea for you

BallZdeepNYC

iTrader: (2)

LOL no i just always had a habit of emptying out my pocket change into a bucket that had nothing to do with a bank account. I was able to pay for more than half of my maxima with that money without touching the money in my bank account

infamous350

yeh buy the x02 hks knock off its stupid to spend 1500 on a exhaust u can buy 3 x02 knock offs for the price of one hks. And i herd sound clips and the x02 sounds alot less raspy and high pitched and sounds deep and throaty very nice sounding.

I would say
Plenum spacer, X02 exhaust(hks knock off), High flow cats, jwt popcharger(but your better off keeping the stock intake), Light weight pulley , technosquare reflash. Thats wut i would do but defitnly dont spend 1500 for the hks seriously lol,


200+ 600+ 400+ 120+130 +500=1950
150$ left use that get ur self a nice detail
U will be happy with the improvment

joe645733

iTrader: (3)

ya, xo2 sounds nice. but does it give as much power as the HKS? no.

joe645733

iTrader: (3)

this dude sounds like a 14 old foreign kid.

why would u take 1k from ur gf. such a liar. who the f*ck gives 1,000 for a birthday...

and ur having ppl fetch u pictures of wheels like no problem, search urself.

terrasmak

iTrader: (8)

No it doesnt , from people dyno charts it seems to be the same.