What have you done for your Z today?
The following 4 users liked this post by SPM350Z:
New Member
iTrader: (1)
350Z/370Z Tech Moderator
MY350Z.COM
MY350Z.COM
And if Mark gets the same, it'll be a true "Bay Area, represent!" Hahaha!
But yeah, the thing is an aerodynamic nothing. Thought it looked decent... small, unobtrusive comparatively. I'll probably take it off one day when I bring my car home (living in friend's driveway). Reinstall my Track version front underspoiler.
Last edited by MicVelo; 08-02-2022 at 10:37 PM.
The following users liked this post:
SPM350Z (08-03-2022)
New Member
iTrader: (1)
Yeah, Shawn, what took you so long to get the same as mine? Ahem... Laff....
And if Mark gets the same, it'll be a true "Bay Area, represent!" Hahaha!
But yeah, the thing is an aerodynamic nothing. Thought it looked decent... small, unobtrusive comparatively. I'll probably take it off one day when I bring my car home (living in friend's driveway). Reinstall my Track version front underspoiler.
And if Mark gets the same, it'll be a true "Bay Area, represent!" Hahaha!
But yeah, the thing is an aerodynamic nothing. Thought it looked decent... small, unobtrusive comparatively. I'll probably take it off one day when I bring my car home (living in friend's driveway). Reinstall my Track version front underspoiler.
New Member
iTrader: (2)
The following 2 users liked this post by Heel Til I Die:
mr. sparco (08-05-2022),
SPM350Z (08-04-2022)
350Z/370Z Tech Moderator
MY350Z.COM
MY350Z.COM
But all good. You know what they say.... Bad notoriety is better than no notoriety.
The following 2 users liked this post by MicVelo:
mr. sparco (08-05-2022),
SPM350Z (08-04-2022)
New Member
iTrader: (13)
The following 6 users liked this post by mr. sparco:
Heel Til I Die (08-05-2022),
icer5160 (08-04-2022),
jhc (08-07-2022),
MicVelo (08-04-2022),
SPM350Z (08-04-2022),
and 1 others liked this post.
The following users liked this post:
mr. sparco (08-05-2022)
350Z/370Z Tech Moderator
MY350Z.COM
MY350Z.COM
Like I said.... notoriety isn't a bad thing. My pic is on the walls of the CDC. Thank you for sharing Mistuh Sparco.
But I gotta tell ya, there is no known vaccine and the only cure is reading ALL 9-thou-something posts. The few good ones and ALL the bad ones. At last count good:bad ratio was ~1:9000.
Not even going to ask "So, you had nothing else to do last night?"
The following users liked this post:
mr. sparco (08-05-2022)
New Member
iTrader: (13)
It has been a slow day and as long as there were a few laughs. 🤪
The following 4 users liked this post by mr. sparco:
New Member
The backup camera video feed and power have been routed along the left side of the Z to the dashboard (following the wiring harness of the car). And I finished preparing the wiring connections between the amplifier and the headunit (more detail here: https://my350z.com/forum/audio-build...l#post11083625).
New Member
The subwoofer is now in position and connected. Still wiring in the front half of the car to complete and then reinstall the interior and seats. More detail here: https://my350z.com/forum/audio-build...l#post11083681
New Member
A few things were finished up today:
1) The stereo installation is complete, detail here: https://my350z.com/forum/audio-build...l#post11083681
2) The backup camera is working great, along with the manual override switch I wired in
And,
3) I finally have my TPMS working properly, after wiring up a push-button switch and generic connector to the TPMS reset wire behind the dash. When needed, I can plug in the button harness and re-connect the sensors! Thanks for all the good advice in this post about the TPMS system: https://my350z.com/forum/brakes-and-...ml#post8431555
1) The stereo installation is complete, detail here: https://my350z.com/forum/audio-build...l#post11083681
2) The backup camera is working great, along with the manual override switch I wired in
And,
3) I finally have my TPMS working properly, after wiring up a push-button switch and generic connector to the TPMS reset wire behind the dash. When needed, I can plug in the button harness and re-connect the sensors! Thanks for all the good advice in this post about the TPMS system: https://my350z.com/forum/brakes-and-...ml#post8431555
Last edited by khnitz; 08-10-2022 at 04:17 PM.
The following users liked this post:
SPM350Z (08-11-2022)
New Member
The following users liked this post:
SPM350Z (08-12-2022)