What have you done for your Z today?
New Member
iTrader: (6)
Hey Cobra,
Good point! Yes, I have thought about the potential heat issues with a metal ****. Here in CA this isn't that big of a deal depending on the season and which part of CA you live in. Where I live and where I park the vehicle 95% of the time won't cause any heat issues inside the cabin or with the ****. Also, some good quality UV/IR window tint makes a huge difference here (must do front windshield, and yes that's illegal in CA). Worst case scenario, I can swap ***** out in the summer months or just throw a shade over it if I'm parking for hours in an uncovered/exposed area (Like visiting Laguna Seca!). The **** is countersunk/shorter than the stock one, so I may or may not like the ergonomics (being a tall guy). I haven't tried it out yet since I received the **** while the Z was still in the paint shop. I'll be doing some tinkering this coming weekend.
Cheers!
-Icer
Good point! Yes, I have thought about the potential heat issues with a metal ****. Here in CA this isn't that big of a deal depending on the season and which part of CA you live in. Where I live and where I park the vehicle 95% of the time won't cause any heat issues inside the cabin or with the ****. Also, some good quality UV/IR window tint makes a huge difference here (must do front windshield, and yes that's illegal in CA). Worst case scenario, I can swap ***** out in the summer months or just throw a shade over it if I'm parking for hours in an uncovered/exposed area (Like visiting Laguna Seca!). The **** is countersunk/shorter than the stock one, so I may or may not like the ergonomics (being a tall guy). I haven't tried it out yet since I received the **** while the Z was still in the paint shop. I'll be doing some tinkering this coming weekend.
Cheers!
-Icer
I've put Samco hoses on multiple cars and never had any issues.
The following users liked this post:
icer5160 (04-19-2023)
The following users liked this post:
icer5160 (04-19-2023)
New Member
The following users liked this post:
SPM350Z (04-18-2023)
New Member
New Member
iTrader: (4)
Hey Bre,
If I may make a suggestion, check out bumperplugs.com, fill in those holes from the dealer installed lic plate frame on front bumper. I was using these on my Z before I had the front end re-painted (holes were filled in). Now my bumper is clean/smooth across the front. But bumperplugs offers nicely paint matched plugs. They aren't cheap for what you actually get, but it is cheaper than getting a whole bumper repainted and it's better than leaving unsightly holes!
Nice ride! Looks good!
Cheers!
-Icer
If I may make a suggestion, check out bumperplugs.com, fill in those holes from the dealer installed lic plate frame on front bumper. I was using these on my Z before I had the front end re-painted (holes were filled in). Now my bumper is clean/smooth across the front. But bumperplugs offers nicely paint matched plugs. They aren't cheap for what you actually get, but it is cheaper than getting a whole bumper repainted and it's better than leaving unsightly holes!
Nice ride! Looks good!
Cheers!
-Icer
New Member
Hey Bre,
If I may make a suggestion, check out bumperplugs.com, fill in those holes from the dealer installed lic plate frame on front bumper. I was using these on my Z before I had the front end re-painted (holes were filled in). Now my bumper is clean/smooth across the front. But bumperplugs offers nicely paint matched plugs. They aren't cheap for what you actually get, but it is cheaper than getting a whole bumper repainted and it's better than leaving unsightly holes!
Nice ride! Looks good!
Cheers!
-Icer
If I may make a suggestion, check out bumperplugs.com, fill in those holes from the dealer installed lic plate frame on front bumper. I was using these on my Z before I had the front end re-painted (holes were filled in). Now my bumper is clean/smooth across the front. But bumperplugs offers nicely paint matched plugs. They aren't cheap for what you actually get, but it is cheaper than getting a whole bumper repainted and it's better than leaving unsightly holes!
Nice ride! Looks good!
Cheers!
-Icer
New Member
New Member
New Member
I was quoted 20-24 week ETA when I ordered these on January 23rd. BBF face might take longer as it is a polish and clear annodize.
They arrived to my desk on April 17.
Unsure if the timeline is shorter as it is an order for a retailers employee vehicle, or they intentionally over quote the lead time due to the variables involved with manufacturing, shipping, customs, etc.
New Member
Purchased new, as I work for a company that is an authorized Work Wheels retailer.
I was quoted 20-24 week ETA when I ordered these on January 23rd. BBF face might take longer as it is a polish and clear annodize.
They arrived to my desk on April 17.
Unsure if the timeline is shorter as it is an order for a retailers employee vehicle, or they intentionally over quote the lead time due to the variables involved with manufacturing, shipping, customs, etc.
I was quoted 20-24 week ETA when I ordered these on January 23rd. BBF face might take longer as it is a polish and clear annodize.
They arrived to my desk on April 17.
Unsure if the timeline is shorter as it is an order for a retailers employee vehicle, or they intentionally over quote the lead time due to the variables involved with manufacturing, shipping, customs, etc.
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
May try install my ECU,but I need to buy a new laptop so I can flash it
New Member
stillen oil pan, 75mm throttlebody, z1 oil catch can, z1 25 row oil cooler, idler delete and factory oil cooler sandwich delete. When I was done with all that, I cracked my upper oil pan with a new oil pressure sending unit.So I've also ordered a new one.
Last edited by StreetSports; 04-27-2023 at 05:31 PM.
The following users liked this post:
bre240z (04-28-2023)
6 inch cawk is my fave!
iTrader: (3)
Sweet Juke..
Gone but not forgotten... Tried to make a laser picture of the old Z... Didn't turn out great but it wasn't a terrible first attempt.
Gone but not forgotten... Tried to make a laser picture of the old Z... Didn't turn out great but it wasn't a terrible first attempt.
The following users liked this post:
khnitz (04-29-2023)