When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
At this point I don't think I'll ever reinstall those. I plan on pullin fenders and going crazy fitment next summer and plus an undertray just gets ripped off in a day
What about trimming the rear fender liner like this (I don't have the front half either):
It covers the large space between the fender and body so at least you don't get a build-up in there over time, and eliminates all mounting points to the factory rolled fenders so you can roll them flat next summer when you go lower.
I actually have the entire rear half of the fender liners on the front fenders. Just the liners that come in contact with the bumper are gone. Also I don't think I'll ever go any lower than I am now, I'll probably raise it so I can go wider I'm almost tucking wheel
Last edited by SamPappas; Jan 26, 2014 at 04:54 PM.
yes he's dead serious. look at his join date. kids want immediate answers, all he had to do was read the got d@mn thread but he didn't even want to do that
edit: there's actually been an influx of new comers and the first thing they do is create a thread on an easy question. something that could have been found with minimal research.
Last edited by Nismo350z#0310; Feb 4, 2014 at 04:52 AM.
yes he's dead serious. look at his join date. kids want immediate answers, all he had to do was read the got d@mn thread but he didn't even want to do that
edit: there's actually been an influx of new comers and the first thing they do is create a thread on an easy question. something that could have been found with minimal research.
No where on this thread does he say what make and model the wheels are. Yes I understand that he gave the specs so I should have not included that in my question but damn.
Varrstoen es2 19x9.5/10.5 +22F/R. Have 20mm spacers in the rear. But if you're ryan shecklers little brother lemme go ahead and refer you to Volk TE37's :P
Love the build OP. Being 19, it's awesome to see someone around my age be able to accomplish what you did with your Z. I plan on taking mine in a similar direction so this has definitely inspired me. Good luck with future plans!
Hard work pays off. I work my *** off every chance I get. Full time over every break and part time 20 hours during school. Gotta pay to play. Its doable if you want it though. Side note, I own two pairs of wheels now. Please pay no mind to the iphone pic and salt on the car it's the midwest.
Varrstoen es2 19x9.5/10.5 +22F/R. Have 20mm spacers in the rear. But if you're ryan shecklers little brother lemme go ahead and refer you to Volk TE37's :P
Thanks g! But, i figured out what wheels these were. Also, the Volk TE37s are out of budget for my build considering thats its funded mostly by myself.