Cruise control not working? No light
#1
Registered User
Thread Starter
Join Date: Nov 2014
Location: Tucson, AZ
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Cruise control not working? No light
I’m going kind of crazy here trying to figure this out. I’ll keep looking, but maybe someone has experienced it.
05 Enthusiast AT, cruise control will not work. (No light on dash) It hasn’t worked for a few months.
Brake lights are working.
I have not been able to pull any codes.
Clock spring has been replaced and CC worked afterwards.
Just took steering wheel apart, everything is connected.
After market radio was done 4 years ago, CC have worked after.
05 Enthusiast AT, cruise control will not work. (No light on dash) It hasn’t worked for a few months.
Brake lights are working.
I have not been able to pull any codes.
Clock spring has been replaced and CC worked afterwards.
Just took steering wheel apart, everything is connected.
After market radio was done 4 years ago, CC have worked after.
#2
New Member
Did you check to see if the lock-nut on you ASCD cancel switch didn't become loose and allow the switch to move in the direction toward the drivers seat, which in turn would keep this switch in a ''constantly cancelled'' state, eliminating its functionality...?
#5
New Member
The ASCD cancel switch in the brake pedal assembly wouldn't prevent the CRUISE light from coming on. You're switch inputs aren't getting from the steering wheel to the ECU. The wiring is fairly simple. The switches connect to the clock spring in the steering wheel, which is then wired directly to the ECU. The service manual includes a schematic on page EC-618.
Thread
Thread Starter
Forum
Replies
Last Post
eliopulos_2jz
Maintenance & Repair
8
07-25-2014 05:05 AM