Headlight diagram?
Thread Starter
Registered User
Joined: Aug 2018
Posts: 18
Likes: 0
From: Tennessee
Headlight diagram?
Has anyone solved the puzzle of what color wire from car to headlights when connecting wires? Previous owner cut both sides of harness but passenger side halos don’t work and running lights don’t work. Any help would be amazing!
i have a touring model..
i have a touring model..
Last edited by Hayden350; Aug 18, 2018 at 05:02 PM.
I think this is correct:
6 pin (halogen)
1:Green/white. 12v+ Turn signal
2:Red/yellow. 12v+ High beam
3:Black. Ground. H/L beams
4:Black. Ground. Parking light/turn signal.
5:Red/blue. 12v + Parking light
6: Red/black. 12v+ Low beam
6 pin (halogen)
1:Green/white. 12v+ Turn signal
2:Red/yellow. 12v+ High beam
3:Black. Ground. H/L beams
4:Black. Ground. Parking light/turn signal.
5:Red/blue. 12v + Parking light
6: Red/black. 12v+ Low beam
Trending Topics
Thread Starter
Registered User
Joined: Aug 2018
Posts: 18
Likes: 0
From: Tennessee
do you have any idea of which is the running lights ?
Thread Starter
Registered User
Joined: Aug 2018
Posts: 18
Likes: 0
From: Tennessee
So right now I hace
blue(headlight),white (turn signal and led lights), positive and negative connected
yellow with purple/white
black (from the signal), black( from car)
grey( halos), black/white, black from led
problems: bright light won’t work
idk what brown wire is and no idea where bright light wire goes
blue(headlight),white (turn signal and led lights), positive and negative connected
yellow with purple/white
black (from the signal), black( from car)
grey( halos), black/white, black from led
problems: bright light won’t work
idk what brown wire is and no idea where bright light wire goes
There should be no wire for daytime running lights unless you have a non-US model.
Also, halos were never a factory option so I don’t think the wire colors in your Z are going to match.
Best advice is to use a 12v test light probe or multimeter while putting the leads in different pins or touching different wires to determine what does what.
Also, halos were never a factory option so I don’t think the wire colors in your Z are going to match.
Best advice is to use a 12v test light probe or multimeter while putting the leads in different pins or touching different wires to determine what does what.
Thread Starter
Registered User
Joined: Aug 2018
Posts: 18
Likes: 0
From: Tennessee
There should be no wire for daytime running lights unless you have a non-US model.
Also, halos were never a factory option so I don’t think the wire colors in your Z are going to match.
Best advice is to use a 12v test light probe or multimeter while putting the leads in different pins or touching different wires to determine what does what.
Last edited by Hayden350; Aug 19, 2018 at 04:57 PM.
Thread
Thread Starter
Forum
Replies
Last Post
john350Z
Engine & Drivetrain
4
Apr 7, 2013 04:43 PM
Vincey2kr1
2003-2009 Nissan 350Z
3
Nov 16, 2002 04:19 PM
Vincey2kr1
Audio & Video
1
Nov 14, 2002 02:47 PM