So after installing a new compressor, condensor and drier, I filled the system with refrigerant and started the car to see if it was blowing cold air. The air coming out was blowing cold as I turned on the A/C and heard the clutch engage, but after having the A/C on for about 10-20 min the clutch didnt disengage. If I recall it should kick on/off periodically. I was worried about burning the compressor out so I turned it off.

I haven't replaced the A/C pressure switch or expansion valve (not looking forward to ripping dash out). Hoping for just the A/C switch needs to be replaced.
Any information as to why it stays engage would be helpful.
🤙🏽