Door Lock/Wiring Issue
04-09-2020, 08:43 AM
#1
New Member
Thread Starter
Join Date: Apr 2020
Location: Birmingham, AL
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Door Lock/Wiring Issue
I bought a 350z someone else did some half-butt work on. Replacing the door handles, I've found the key lock rod is completely missing (ordered it already). But what's got me more confused is the door key cylinder switch is not plugged into anything.
The cylinder switch contact is in the right place, and the wire runs inside the door shell, but halfway down the door shell the connector is there with absolutely nothing to plug into. I can't find information on where that should continue to or a parts number to order. Help?
The cylinder switch contact is in the right place, and the wire runs inside the door shell, but halfway down the door shell the connector is there with absolutely nothing to plug into. I can't find information on where that should continue to or a parts number to order. Help?
04-09-2020, 08:47 AM
#2
New Member
Thread Starter
Join Date: Apr 2020
Location: Birmingham, AL
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
To illustrate... the door key cylinder switch, where is that wire supposed to ultimately lead to? And I'm missing the wiring where it's supposed to plug in halfway inside the door.
This picture shows the whole piece that I have - I need whatever comes after the plug.
Last edited by jwseaton; 04-09-2020 at 08:52 AM. Reason: Adding more info
Thread
Thread Starter
Forum
Replies
Last Post