When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Those stamps in your pictures CD0# 1 and CD0 #2 don't mean anything. Check the VIN on the plate at the bell housing. It should be in this general area towards the bottom.
Once you run the VIN, cross-reference it with the attached handy chart from Z1. If the production date is between 7/04-11/06, it's the CD009.
The real question is, why was the bellhousing cut off? If they did not weld it back on perfectly straight it will put un needed wear and tear on the tranny and crank.