05 water pump
#1
New Member
Thread Starter
Join Date: Aug 2021
Location: United states
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
05 water pump
Hi all i just recently did a Water pump replacement , snapped the bolt in half when tightening the new one in, I was able to get it out but now I can’t find any new bolts for the pump, I can’t seem to find them on any website, nor auto part store, does anyone have a part number for the water pump mounting bolts? I also need the washer for them aswell .
Last edited by MikesCar; 08-15-2021 at 06:41 PM.
#2
Pull another one of the bolts out and measure it.
I think they’re M6x1, but I’m not sure the length. They’re not a Nissan special, that’s certain. Mesure and double check the pitch with a pitch gauge if you have one or use the size/pitch checkers at Home Depot in the hardware section. You can get quality flanged hardware with the yellow-zinc coating from McMaster-Carr. In a pinch the Home Depot stuff can probably work, so long as it’s Grade 8.8 or better and flanged.
I think they’re M6x1, but I’m not sure the length. They’re not a Nissan special, that’s certain. Mesure and double check the pitch with a pitch gauge if you have one or use the size/pitch checkers at Home Depot in the hardware section. You can get quality flanged hardware with the yellow-zinc coating from McMaster-Carr. In a pinch the Home Depot stuff can probably work, so long as it’s Grade 8.8 or better and flanged.
The following users liked this post:
oldfreakingguy (08-16-2021)
Thread
Thread Starter
Forum
Replies
Last Post
Adam707
2003-2009 Nissan 350Z
3
09-29-2019 04:50 PM