Dealer employees caught drag racing GT-R's
#81
Registered User
Join Date: Feb 2007
Location: Tampa, FL
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
And you're laughing b/c? Do you know anything about properly seating rings? Most motors in high performance application are broken in on dynos...including the GT-R motors. Actual "break-in" for these once delivered is 300 miles as they are already pre run on an engine dyno before being put into the car. Believe it or not they also run the car and bed the breaks in prior to shipping too. FYI
Short...high power loads are whats recommended in modern motors, in progression. IMO some pulls down the drag strip constitutes the short, high load period. The short periods reduce possible "overheating". Low power settings don't expand the piston rings enough which leaves a film of oil on the cylinder walls and could lead to possible oil consumption issues down the road. It's been debated time and time again and I'll stick to whats worked for me and the people who've I've spoken to who have built countless high performance modern engines.
Here's a little material for you to read and research.
http://www.mototuneusa.com/break_in_secrets.htm
http://www.ntnoa.org/enginebreakin.htm
Short...high power loads are whats recommended in modern motors, in progression. IMO some pulls down the drag strip constitutes the short, high load period. The short periods reduce possible "overheating". Low power settings don't expand the piston rings enough which leaves a film of oil on the cylinder walls and could lead to possible oil consumption issues down the road. It's been debated time and time again and I'll stick to whats worked for me and the people who've I've spoken to who have built countless high performance modern engines.
Here's a little material for you to read and research.
http://www.mototuneusa.com/break_in_secrets.htm
http://www.ntnoa.org/enginebreakin.htm
and your links are for 4 stroke motors.... read it before you post it!
#83
Registered User
iTrader: (12)
Join Date: Jun 2003
Location: Little Rock
Posts: 2,332
Likes: 0
Received 0 Likes
on
0 Posts
oh gawd, not the 'break in secrets' again. The VQ is not a motocycle or nascar engine. Blackstone tests and dynos indicate that the VQ is not a Honda Civic motor which is pretty much settled in by 500 miles. We're talking about a GTR here, so the VQ doesnt even apply, but just because Ferrari's, Vettes, Porsche, and Nascar does something, that doesnt apply to every high performance internal combustion engine. It might, but youre making an assumption.
#85
Registered User
Join Date: Nov 2008
Location: beverly hills
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
So why can't Nissan properly design a transmission that is capable of withstanding the same type of abuse? We're not talking about 600+ rwhp here either. Was proper R&D done? Surely they must have known that using launch control repeatedly would fry the stock tranny. Which is why turning VDC off voids your warranty. All Nissan does is boast about its laptimes at the ring and 0-60 times. These people are buying supercars near $100k, they should be able to drive it (on the street) as they wish.
Last edited by iZdeadpeople; 11-11-2008 at 11:55 AM.
#86
This is one reason why I would not buy a used sports car because in all likelihood the car is going to be sold soon. Last week, I saw a GTR with a dealer license place that guy was cutting cars left and right. He is probaly the owner of the car, but he treated the car like it was stolen. One reason I never take my car to a dealership for anything, if I did, I will not let it stay overnight.
#87
Registered User
iTrader: (6)
Join Date: Oct 2006
Location: New Orleans
Posts: 2,037
Likes: 0
Received 0 Likes
on
0 Posts
Point of the matter is, the car cannot take it's own power output. The GTR was advertised and marketed as a supercar with launch control. The transmission should have been up to par. Launching it should not matter. Look at the abuse the ford 9" rear went through in drag racing applications. What about some of the american automatic transmissions that are also used in drag racing applications (even some mkiv tt owners with 600+hp use them). Lots of these cars are running 10 seconds or faster 1/4 mile times without any of the issues we're seeing from current GTR owners.
So why can't Nissan properly design a transmission that is capable of withstanding the same type of abuse? We're not talking about 600+ rwhp here either. Was proper R&D done? Surely they must have known that using launch control repeatedly would fry the stock tranny. Which is why turning VDC off voids your warranty. All Nissan does is boast about its laptimes at the ring and 0-60 times. These people are buying supercars near $100k, they should be able to drive it (on the street) as they wish.
So why can't Nissan properly design a transmission that is capable of withstanding the same type of abuse? We're not talking about 600+ rwhp here either. Was proper R&D done? Surely they must have known that using launch control repeatedly would fry the stock tranny. Which is why turning VDC off voids your warranty. All Nissan does is boast about its laptimes at the ring and 0-60 times. These people are buying supercars near $100k, they should be able to drive it (on the street) as they wish.
Thread
Thread Starter
Forum
Replies
Last Post
Colombo
Forced Induction
35
11-09-2020 10:27 AM