New Convertible / Coupe Sub Box Behind The Seats
04-21-2006, 12:20 PM
#46
Originally Posted by JimRHIT
A vs. B test ... what was B?
In car experience is just amazing... We had it in a roadster and result is amazing... The amp was a 400 Watt US Amps Running 2 JL 10w1 subs...
For most people 1 enclosure will be more then enough, I know it is for me... I would rate th eenclosures Loud... Not the cleanest but definitely has a presence. 2 enclosures is Very very loud... The particular car we tried it in had a Fiberglass mold seperating th eback of the seats from the compartments so in a stock roadster it will generate better results...
04-21-2006, 12:29 PM
#47
Originally Posted by javikid
how much $$$$
OK PRICING...
THERE WILL BE A GROUP BUY FOR THE ENCLOSURE
GROUP BUY PRICE WILL BE $250/each + SHIPPING.
ONLY 7 ENCLOSURES WILL BE SOLD AT THIS PRICE...
AFTER THAT THE PRICE WILL BE $299.95/each + Shipping. Sorry We can't make any exclusions.
You can purchase the enclosure with the subwoofer for an additional $79.95
Or you can use your own sub.
HERE IS THE LINK FOR GROUP BUY
https://my350z.com/forum/audio-and-video/186270-group-buy-new-roadster-coupe-enclosure.html
IT IS EFFECTIVE IMMEDIATELY
THERE WILL BE A GROUP BUY FOR THE ENCLOSURE
GROUP BUY PRICE WILL BE $250/each + SHIPPING.
ONLY 7 ENCLOSURES WILL BE SOLD AT THIS PRICE...
AFTER THAT THE PRICE WILL BE $299.95/each + Shipping. Sorry We can't make any exclusions.
You can purchase the enclosure with the subwoofer for an additional $79.95
Or you can use your own sub.
HERE IS THE LINK FOR GROUP BUY
https://my350z.com/forum/audio-and-video/186270-group-buy-new-roadster-coupe-enclosure.html
IT IS EFFECTIVE IMMEDIATELY
Last edited by Nazar; 04-21-2006 at 12:57 PM.
05-03-2006, 11:24 AM
#53
Originally Posted by javikid
I Don't Understand The Picture....?
05-03-2006, 03:22 PM
#55
Registered User
iTrader: (6)
Join Date: Mar 2003
Location: Hermosa Beach, CA
Posts: 4,416
Likes: 0
Received 0 Likes
on
0 Posts
Damn Nazar ... $250 for a 10" mold! with carpet 
I usually always recommend you to my guys that I do installs for, but damn I can't support this.
Two Problems here:
1) Price is too high, Yes .. I understand a mold is difficult to make, but you are now in the $15-30 per box range in materials/labor considering the simple carpet covering (assuming you have a good mold, this is a set it and forget it manufacturing process).
2) You are firing the subwoofer into an "secondary" leaky chamber .. not the cabin, altering sound quality as well as quantity as there are lots of undamped panels in there to excite and reduce output.
- jim
I usually always recommend you to my guys that I do installs for, but damn I can't support this.
Two Problems here:
1) Price is too high, Yes .. I understand a mold is difficult to make, but you are now in the $15-30 per box range in materials/labor considering the simple carpet covering (assuming you have a good mold, this is a set it and forget it manufacturing process).
2) You are firing the subwoofer into an "secondary" leaky chamber .. not the cabin, altering sound quality as well as quantity as there are lots of undamped panels in there to excite and reduce output.
- jim
05-03-2006, 04:10 PM
#56
Registered User
iTrader: (1)
Join Date: Nov 2002
Location: Socal
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by JimRHIT
Damn Nazar ... $250 for a 10" mold! with carpet
I usually always recommend you to my guys that I do installs for, but damn I can't support this.
Two Problems here:
1) Price is too high, Yes .. I understand a mold is difficult to make, but you are now in the $15-30 per box range in materials/labor considering the simple carpet covering (assuming you have a good mold, this is a set it and forget it manufacturing process).
2) You are firing the subwoofer into an "secondary" leaky chamber .. not the cabin, altering sound quality as well as quantity as there are lots of undamped panels in there to excite and reduce output.
- jim
I usually always recommend you to my guys that I do installs for, but damn I can't support this.
Two Problems here:
1) Price is too high, Yes .. I understand a mold is difficult to make, but you are now in the $15-30 per box range in materials/labor considering the simple carpet covering (assuming you have a good mold, this is a set it and forget it manufacturing process).
2) You are firing the subwoofer into an "secondary" leaky chamber .. not the cabin, altering sound quality as well as quantity as there are lots of undamped panels in there to excite and reduce output.
- jim
05-04-2006, 07:37 AM
#57
Originally Posted by JimRHIT
Damn Nazar ... $250 for a 10" mold! with carpet
I usually always recommend you to my guys that I do installs for, but damn I can't support this.
Two Problems here:
1) Price is too high, Yes .. I understand a mold is difficult to make, but you are now in the $15-30 per box range in materials/labor considering the simple carpet covering (assuming you have a good mold, this is a set it and forget it manufacturing process).
2) You are firing the subwoofer into an "secondary" leaky chamber .. not the cabin, altering sound quality as well as quantity as there are lots of undamped panels in there to excite and reduce output.
- jim
I usually always recommend you to my guys that I do installs for, but damn I can't support this.
Two Problems here:
1) Price is too high, Yes .. I understand a mold is difficult to make, but you are now in the $15-30 per box range in materials/labor considering the simple carpet covering (assuming you have a good mold, this is a set it and forget it manufacturing process).
2) You are firing the subwoofer into an "secondary" leaky chamber .. not the cabin, altering sound quality as well as quantity as there are lots of undamped panels in there to excite and reduce output.
- jim
I am open for constructive critisism however this is rather not called for.
Everyone is allowed their personal opinions... YOU CAN NOT BUILD THIS BOX FOR $15 IF YOU CAN I WILL BUY AT LEAST 100 BOXES FROM YOU... (Same concept as You can buy a Hyundai for $15,000 But Why is everyone driving a 350Z in this forums that cost twice as much). The box you build needs to be the same exact quality thickness and accuracy everytime you make it. And you will need to be able to produce at least 4-5 Boxes a week. ... It is a free country you can say what you want but please think about what you are saying before saying it. No hard feelings here just want to set it straight.
I think you forget the process and the labor that goes into these 100% fiberglass sealed enclosures... We have these made with WQuality Resin instead of th estuff you get in Auto Zone or Home depot. This box is a 36 piece mold so It takes time to build it.... IT IS NOT FOR EVERYONE... You want to build your own box I am all for you and support your decision. However this is not your Wooded square box that will be held in place with metal straps. This is a custom fit fiberglass enclosure... AS for the cost It is VERY FAIR and will be marked at $299.95 after the group buy... We DON'T Even need to carped the face since you wont see it, We only do it so it looks nicer when the cover is open for the Glove Box... we don't even calculate the cost of carpet.
As for firing it into the cabin well you do need to Dynamat the sub floor in there and you will not have any more vibrations then you would with any other enclosure... HAVE DONE MANY 350Z's and vibration is a problem with these cars what ever enclosure you use. weather you are firing back or not.
Nazar
603-642-4222
Last edited by Nazar; 05-04-2006 at 08:34 AM.