New Convertible / Coupe Sub Box Behind The Seats
04-11-2006, 05:18 AM
#27
Thanx for all the compliments.
As you may or may not know, The shop that sprays these for us uses industrial grade fiberglass and the strength of this stuff is greater then what you would find in any store. The resin gets sprayed out of a industrial chop gun and there are upsolutely no air pockets or such. This is the same stuff they use for Architectural grade load bearing columns and building materials. End result is very sturdy usualy between 1/8" and 1/4" thick walls.
As per pricing we are still negotiating with the fiberglass shop. We are trying to stay right around our rear corner enclosure pricing. We will offer it with or without a Sub. There will be a special buy in at a special price for all the members. Pricing should fall in between $329.95-$369.95 each side. And we propably will offer a discount for buying it for both sides. As well as buying it with a sub.
Those of you who have a bigger amp, Just get both sides...
And like someone else suggested, There are many other subs that will fit.
As you may or may not know, The shop that sprays these for us uses industrial grade fiberglass and the strength of this stuff is greater then what you would find in any store. The resin gets sprayed out of a industrial chop gun and there are upsolutely no air pockets or such. This is the same stuff they use for Architectural grade load bearing columns and building materials. End result is very sturdy usualy between 1/8" and 1/4" thick walls.
As per pricing we are still negotiating with the fiberglass shop. We are trying to stay right around our rear corner enclosure pricing. We will offer it with or without a Sub. There will be a special buy in at a special price for all the members. Pricing should fall in between $329.95-$369.95 each side. And we propably will offer a discount for buying it for both sides. As well as buying it with a sub.
Those of you who have a bigger amp, Just get both sides...
And like someone else suggested, There are many other subs that will fit.
04-11-2006, 12:44 PM
#28
Registered User
iTrader: (1)
Join Date: Nov 2002
Location: Socal
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 16psibrick
a raelly nice sub to fit in this would be the image dynamics idq or id seiries, definetly will fit and provide a bit more output and sq than the 10w1, but awesome awesome work nazar, wish i can do someting as nice 
b
b
Sealed enclosure recommendation (varies depending on d2 or d4 setup)
ID10 .4 - .8cuft
IDQ10 .3 -.7cuft
1.0cuft seems perfect for their 12" driver.... but are both 10" and 12" boxes going to be available? Having a choice would be pretty cool!
04-11-2006, 01:04 PM
#29
Originally Posted by beggohbee
That's what I want to put in, but according to the ID website:
Sealed enclosure recommendation (varies depending on d2 or d4 setup)
ID10 .4 - .8cuft
IDQ10 .3 -.7cuft
1.0cuft seems perfect for their 12" driver.... but are both 10" and 12" boxes going to be available? Having a choice would be pretty cool!
Sealed enclosure recommendation (varies depending on d2 or d4 setup)
ID10 .4 - .8cuft
IDQ10 .3 -.7cuft
1.0cuft seems perfect for their 12" driver.... but are both 10" and 12" boxes going to be available? Having a choice would be pretty cool!
Last edited by Nazar; 04-11-2006 at 01:08 PM.
04-11-2006, 02:24 PM
#31
Registered User
iTrader: (2)
Join Date: Nov 2005
Location: Seattle, WA
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
hopefully since it's a smaller product and does not need any finishing at all that you can bring the price down to a nicer level...
300 would be too much for me for something I'll never see... i'd sooner buy the corner pods in that case... just my 2 cents...
nice job by the way..
will the factory bars that drop down need to be removed or are they incorporated into the design.
thanks
300 would be too much for me for something I'll never see... i'd sooner buy the corner pods in that case... just my 2 cents...
nice job by the way..
will the factory bars that drop down need to be removed or are they incorporated into the design.
thanks
04-11-2006, 02:50 PM
#32
Originally Posted by rmesola
hopefully since it's a smaller product and does not need any finishing at all that you can bring the price down to a nicer level...
300 would be too much for me for something I'll never see... i'd sooner buy the corner pods in that case... just my 2 cents...
nice job by the way..
will the factory bars that drop down need to be removed or are they incorporated into the design.
thanks
300 would be too much for me for something I'll never see... i'd sooner buy the corner pods in that case... just my 2 cents...
nice job by the way..
will the factory bars that drop down need to be removed or are they incorporated into the design.
thanks
NOT TO MENTION PRETTY MUCH THE ONLY CHOICE FOR THOSE CONVERTIBLE OWNERS.
The bar in the back can stay in tact. The little ***** sticking out of the box will stay in there like the stock pockets.
04-12-2006, 05:28 AM
#34
Originally Posted by Z1 Performance
Nazar - any idea if an Adire Audio subs would fit (Tumult or Brahma line)? 10 inch...
Send me the specs if you like at wickedcas@aol.com
04-12-2006, 09:04 AM
#35
Shift_Boost
iTrader: (28)
Join Date: Dec 2005
Location: On a forum dedicated to Boost
Posts: 10,733
Likes: 0
Received 23 Likes
on
18 Posts
Originally Posted by 16psibrick
a raelly nice sub to fit in this would be the image dynamics idq or id seiries, definetly will fit and provide a bit more output and sq than the 10w1, but awesome awesome work nazar, wish i can do someting as nice
b
b
Wow. someone who has jumped off the JL bandwagon. Nice to see someone who KNOWS good audio when he hears it. I've bought JL for over 10 years. Ever since the new stuff came out and they did away with the old W6...they have gone down hill IMO. Haven't heard the new W1 (they always sounded good), but I'll stick with Image Dynamics or the like from now on. My ID8s pound with such clarity, its unreal. And they're 4 X cheaper than my W6v2s I had in my last car.
04-12-2006, 09:08 AM
#36
