im going to install amp and subs in OEM HU this sat.. need little help..
i just grap the line out put conv, and i dont know where this wires need to tap in to.. do i need to tap in to rear speaker wires? or OEM subs wires.. and should i tap it in to near the HU or it doesnt matter... and what colors are they? speaker wires.. please help!!!
thanks!

 

anybody?!

 

You will need two lineout converters because the front and rear speakers are highpass filteres and the sub is low pass. All you do is t-tap the factory speaker wires. If you want to maintain fade front to rear you'll need three converters

 

You may want to consider taking it to a stereo shop.. installing on your Z is not the best time to be learning automotive wiring 101. If thats not an option, make sure you have all of the color codes for the wires in hand before you start. If the Amp you want to connect already has line level inputs you dont need a converter for that amp.


An amp and sub install shouldn't run you more than $75.00-$100.00, unless you want something custom done.

 

can i just tap in to rear speaker and do it?