Dash Removal on 06 Model

Reply Subscribe

Thread Tools

Search this Thread

Nov 4, 2006 | 08:03 PM

Stability

Thread Starter

Registered User

Joined: Sep 2006

Posts: 22

Likes: 0

From: Oklahoma City

Dash Removal on 06 Model

Has anyone done this yet. I searched but Only seem to come up with 2003. The cubby is different and doesnt have the same door clasp to remove. Any info would be helpfull.

Nov 4, 2006 | 08:05 PM

zman1910

Registered User

iTrader: (3)

Joined: Jan 2005

Posts: 1,895

Likes: 0

From: NY

Its essentially the same thing. I've had both models...and have taken apart both. Just the other day I put in the Avic Z1 and I asssure you its the same

Nov 4, 2006 | 08:25 PM

Stability

Thread Starter

Registered User

Joined: Sep 2006

Posts: 22

Likes: 0

From: Oklahoma City

how do you access the screws in the cubby?

Nov 4, 2006 | 08:27 PM

zman1910

Registered User

iTrader: (3)

Joined: Jan 2005

Posts: 1,895

Likes: 0

From: NY

Quote:

Originally Posted by Stability

how do you access the screws in the cubby?

There are 2 plastic covers on the sides(after you remove the rubber) that snap off with a screw driver....the screws are behind them

Nov 4, 2006 | 08:31 PM

Stability

Thread Starter

Registered User

Joined: Sep 2006

Posts: 22

Likes: 0

From: Oklahoma City

okay, i did see those, just didnt know if they were removable. Thank you for the help

Nov 4, 2006 | 08:59 PM

bdahern

Registered User

iTrader: (9)

Joined: Apr 2006

Posts: 377

Likes: 0

From: Delaware

I took mine out to install a Roady XT into the cubby - it is essentially the same as previous years - once you pull the rubber cover out of the cubby you will see what you need to do.

Nov 5, 2006 | 03:08 PM

bdahern

Registered User

iTrader: (9)

Joined: Apr 2006

Posts: 377

Likes: 0

From: Delaware

I took mine out again today while installing an amp/sub - the difference with the cubby is there are two plastic covers over the screws in the cubby that you need to remove - otherwise it is the same.