Can anyone tell me how to get to the antennae so I can connect my FM modulater of my Delphi XM radio? All the specs i've read only show removal of the dash on a 6 speed and not an automatic which I have. Does the antennae in the back have a regular connection or must I go through the back of the radio?

 

You'll have to go to the back of the radio. Unplug the antenna plug from the radio, plug fm into radio and antenna to fm modulator wireharness.

here's some intructions on getting to to back of the radio...if you don't feel comfortable with the instructions get a professional to install it for you.

https://my350z.com/forum/showthread....threadid=17432

Also use a rag between the screwdriver and console finisher just as a precaution....to make dure you don't damage the finisher prying at it. The AT ring comes off easy but the finsisher might be a little more difficult.

 

Do you need to remove the side panels before you pull up on the console finisher? The diagram you sent seems to show metal clips on the side panels that attach to the console finisher.

 

No. The console finisher is the thing shown in the 2nd post in that link above.