Farenheit Monitor
#1
Registered User
Thread Starter
iTrader: (20)
Join Date: Jul 2007
Location: Charlotte
Posts: 769
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
hey guys i was wondering if anyone knew of a place to pick up a farenheit monitor to install in my cubby or if anyone had one on here they were wanting to get rid of. Anyone???
#2
New Member
![Default](https://my350z.com/forum/images/icons/icon1.gif)
The monitor you are looking for is sold under these brand names (same monitor, just a different name):
You can find this monitor on eBay. If you don’t like eBay, you can buy the monitor here (it's labeled as Power Acoutik):
http://www.millionbuy.com/pakpt700mhr.html
--Spike
- Farenheit T-7000MHR
- Power Acoustik PT-700MHR
- NESA Vision NSM-7005 7"
You can find this monitor on eBay. If you don’t like eBay, you can buy the monitor here (it's labeled as Power Acoutik):
http://www.millionbuy.com/pakpt700mhr.html
--Spike
#7
New Member
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Clarification: The PT-718TS does have touch-screen function, but that feature only works with devices from Power Acoustik (for example, a Power Acoustik head unit).
--Spike
The following users liked this post:
agentZ (06-26-2018)
Trending Topics
#8
Registered User
iTrader: (6)
Join Date: May 2007
Location: Rahway, N.J.
Posts: 929
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Guys never mind what i said before, i just found out what the problem was. The monitor was not getting enough juice from the positive wire, i didn't crimp the wire the right way, i tested the monitor in straight to the battery and it worked : ).
#9
Registered User
iTrader: (6)
Join Date: May 2007
Location: Rahway, N.J.
Posts: 929
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
I bought the monitor with the touch screen option because maybe down the line there will be a need for it, you never know new things comes up all the time and it's just an extra 10 to 15 dollars.
#10
New Member
![Default](https://my350z.com/forum/images/icons/icon1.gif)
There won’t be any “need (use) for it” unless you buy a H/U from Power Acoustik (but of course that is a possibility).
With this said, I agree with you. The PT-718TS is the newest model and doesn’t cost more, so why not buy this LCD?
I mention the fact that this monitor doesn’t support touch-screen with anything other than Power Acoustik devices so that someone doesn’t purchase this and think they now have touch-screen function. It would work with a CarPC, but that would be a foolish marriage since the Power Accoustik PT-718TS doesn’t support RGB and does not have a VGA connector.
--Spike
With this said, I agree with you. The PT-718TS is the newest model and doesn’t cost more, so why not buy this LCD?
I mention the fact that this monitor doesn’t support touch-screen with anything other than Power Acoustik devices so that someone doesn’t purchase this and think they now have touch-screen function. It would work with a CarPC, but that would be a foolish marriage since the Power Accoustik PT-718TS doesn’t support RGB and does not have a VGA connector.
--Spike
#11
Registered User
iTrader: (6)
Join Date: May 2007
Location: Rahway, N.J.
Posts: 929
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
The only good thing about the touch screen option is that i can switch from AV1 to AV2 right from the monitor. I will post some pictures when i'm done with my setup, i should be able to finish this weekend.
#15
New Member
![Default](https://my350z.com/forum/images/icons/icon1.gif)
My Power Acoustik PT-700MHR has only one A/V input, but I placed a rocker switch between the seats (near where the Z has its seat heater switches). I use this physical switch to toggle among three different A/V inputs. In fact using a physical switch, there is no limit on the number of A/V inputs you have with any remote monitor.
You didn’t mention this, but I believe you can also use the touch-screen functions in the Power Acoustik PT-718TS to access and change the monitor’s settings (e.g., aspect ratio, brightness, etc.). I suppose this isn’t much of an advantage (and why you don't mention it) since these are usually one time settings that are not changed after the initial setup.
--Spike
#17
Registered User
iTrader: (6)
Join Date: May 2007
Location: Rahway, N.J.
Posts: 929
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
True. But here is a different approach.
My Power Acoustik PT-700MHR has only one A/V input, but I placed a rocker switch between the seats (near where the Z has its seat heater switches). I use this physical switch to toggle among three different A/V inputs. In fact using a physical switch, there is no limit on the number of A/V inputs you have with any remote monitor.
You didn’t mention this, but I believe you can also use the touch-screen functions in the Power Acoustik PT-718TS to access and change the monitor’s settings (e.g., aspect ratio, brightness, etc.). I suppose this isn’t much of an advantage (and why you don't mention it) since these are usually one time settings that are not changed after the initial setup.
--Spike
My Power Acoustik PT-700MHR has only one A/V input, but I placed a rocker switch between the seats (near where the Z has its seat heater switches). I use this physical switch to toggle among three different A/V inputs. In fact using a physical switch, there is no limit on the number of A/V inputs you have with any remote monitor.
You didn’t mention this, but I believe you can also use the touch-screen functions in the Power Acoustik PT-718TS to access and change the monitor’s settings (e.g., aspect ratio, brightness, etc.). I suppose this isn’t much of an advantage (and why you don't mention it) since these are usually one time settings that are not changed after the initial setup.
--Spike
i didn't play with the monitor yet, but soon after i finish with everything i will find out more about the monitor, the things i have to do this weekend is connect the rear camer my amp and the subs and i'm all set for now.