New Z owner has a few q's -please help!
#1
Registered User
Thread Starter
Join Date: May 2004
Location: ohio
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
New Z owner has a few q's -please help!
I finally purchased a new Z this weekend (Enthusiast MT6 with some misc goodies from the dealer as well WOW is it fun! It is just sooo much fun to drive! Anyway back on topic...
I must say that the stock stereo is an absolute joke. I guess I was a little spoiled in my old car, but thought it would honestly be a little bit better than it is. On that note, the stereo will be my first mod to my new car. I have been going over countless threads looking for info about the car and have found many of my answers already but have a few more...
1. It seems many of you have opted to place tweeters back in the door sails. Although this may work, I’m concerned about putting a “real” set of speakers in their place. I really think that setup will be much too bright in that location. I did see someone with kick panels, but I don’t feel like spending a whole weekend doing it Does anyone make them?
2. I’ll say it…has anyone dared to be adventurous and drill a new hole into the panel for a tweet? If so, I would like to see it and know your impressions based on the location. Pics are appreciated!
3. Amp location. Behind the driver seat look like a nice little cubbyhole but looks a little congested, any thoughts on an ideal location for two amps…?? Maybe a fan would be in order for the smaller compartment if nothing else.
Oh btw here is the pile of stuff I want to install…
Alpine 7995
Linear Power 2.2
JBL 1200.1
eD 15A
New front comps. I still need to buy since I sold my old set with my last car. Probably go with focal.
Some pics…
My sub. It may be a little overkill in the Z, but since I have it and dont have the money to get a smaller one right now, it will have to do...
Here is my pile of stuff. I was in big hurry to get it out of my old car for the trade in...not letting this stuff go with the old ride
4. What is the amp output of the Z alternator? Does anyone make an aftermarket HO alt? Maybe I wont need one if it is high enough.
Any help is greatly appreciated! Thanks!!!
I must say that the stock stereo is an absolute joke. I guess I was a little spoiled in my old car, but thought it would honestly be a little bit better than it is. On that note, the stereo will be my first mod to my new car. I have been going over countless threads looking for info about the car and have found many of my answers already but have a few more...
1. It seems many of you have opted to place tweeters back in the door sails. Although this may work, I’m concerned about putting a “real” set of speakers in their place. I really think that setup will be much too bright in that location. I did see someone with kick panels, but I don’t feel like spending a whole weekend doing it Does anyone make them?
2. I’ll say it…has anyone dared to be adventurous and drill a new hole into the panel for a tweet? If so, I would like to see it and know your impressions based on the location. Pics are appreciated!
3. Amp location. Behind the driver seat look like a nice little cubbyhole but looks a little congested, any thoughts on an ideal location for two amps…?? Maybe a fan would be in order for the smaller compartment if nothing else.
Oh btw here is the pile of stuff I want to install…
Alpine 7995
Linear Power 2.2
JBL 1200.1
eD 15A
New front comps. I still need to buy since I sold my old set with my last car. Probably go with focal.
Some pics…
My sub. It may be a little overkill in the Z, but since I have it and dont have the money to get a smaller one right now, it will have to do...
Here is my pile of stuff. I was in big hurry to get it out of my old car for the trade in...not letting this stuff go with the old ride
4. What is the amp output of the Z alternator? Does anyone make an aftermarket HO alt? Maybe I wont need one if it is high enough.
Any help is greatly appreciated! Thanks!!!
Last edited by mumra; 06-06-2004 at 05:09 PM.
#5
Registered User
Join Date: Nov 2002
Location: Cincinnati, Ohio
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
I mounted my tweets on the outside af the A-pillars (where the stock ones were , but on the outside of panel)
Sound great there - not too bright at all IMO
I made a board to mount amp on behind seats between strut bar and speaker humps - works well - looks great
Don't know Alt. amp output but I'm sure you will be fine...
Are you using a Capacitor? If not, then I suggest you install one.
Sound great there - not too bright at all IMO
I made a board to mount amp on behind seats between strut bar and speaker humps - works well - looks great
Don't know Alt. amp output but I'm sure you will be fine...
Are you using a Capacitor? If not, then I suggest you install one.
#6
Registered User
Thread Starter
Join Date: May 2004
Location: ohio
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Thanks smokin. Maybe I'll try the tweets there first and see if I like them. I can always move them if I dont like it.
Caps..ahh...I have mixed feeling on caps. I really think they are a not necessary, and in fact, a waste of money if you have a good charging system, but to each his own. You probably wont see a cap in my car. I will upgrade the magic three first and see what happens.
Caps..ahh...I have mixed feeling on caps. I really think they are a not necessary, and in fact, a waste of money if you have a good charging system, but to each his own. You probably wont see a cap in my car. I will upgrade the magic three first and see what happens.
#7
Registered User
iTrader: (3)
Join Date: Jul 2003
Location: Escondido
Posts: 11,373
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by mumra
Thanks smokin. Maybe I'll try the tweets there first and see if I like them. I can always move them if I dont like it.
Caps..ahh...I have mixed feeling on caps. I really think they are a not necessary, and in fact, a waste of money if you have a good charging system, but to each his own. You probably wont see a cap in my car. I will upgrade the magic three first and see what happens.
Thanks smokin. Maybe I'll try the tweets there first and see if I like them. I can always move them if I dont like it.
Caps..ahh...I have mixed feeling on caps. I really think they are a not necessary, and in fact, a waste of money if you have a good charging system, but to each his own. You probably wont see a cap in my car. I will upgrade the magic three first and see what happens.
Trending Topics
#8
Registered User
Join Date: Aug 2002
Location: California
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
I believe it's either a 110 or 115 amp alternator. You can easily fit two or maybe three amps behind the driver's seat with room to spare for ventilation. Fans would probably be a good idea (I'm thinking about it for mine, the JL 300/4 is a furnace). If that's a 15" sub, you'll probably have to build something in the rear floor replacing the spare.
#9
Registered User
Thread Starter
Join Date: May 2004
Location: ohio
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Miaplaya for the pics. Nice setup BTW! Did you mount them (amps) directly to the floor or did you build an amp rack? Also, is heat an issue for you? Did you mount fans or anything?
Bastard (great name btw lol) - Thanks for answering my alt q. I will probably have to build a new box for it like you said. I have a ported and sealed box for it already and neither will really fit. The sealed box will sort of fit standing up but looks like hell. I might do something completely custom and have a sub box built with places for my amps to flank each side of the sub. My brother is a finish carpenter and is very good at stuff like that. I will try and make it as stealthy as possible.
Bastard (great name btw lol) - Thanks for answering my alt q. I will probably have to build a new box for it like you said. I have a ported and sealed box for it already and neither will really fit. The sealed box will sort of fit standing up but looks like hell. I might do something completely custom and have a sub box built with places for my amps to flank each side of the sub. My brother is a finish carpenter and is very good at stuff like that. I will try and make it as stealthy as possible.
#10
I have been told that tweets in the stock position is a big no no.
You want to have them as close as you can to your mid woofers.
I plan on installing mine in the door panel right next to the 6.5"s,
and adding the CDT Audio Upstage System to the A pillars.
I will also be installing a small fan in the compartment behind the seat to have some air flowing. My to total system should be around 800w RMS w/ JL 300-2 and 500-1.
Sorry, no pics.. I'm still waiting for my stuff.
You want to have them as close as you can to your mid woofers.
I plan on installing mine in the door panel right next to the 6.5"s,
and adding the CDT Audio Upstage System to the A pillars.
I will also be installing a small fan in the compartment behind the seat to have some air flowing. My to total system should be around 800w RMS w/ JL 300-2 and 500-1.
Sorry, no pics.. I'm still waiting for my stuff.
Last edited by Zrated; 06-09-2004 at 04:34 AM.
#11
Registered User
iTrader: (3)
Join Date: Jul 2003
Location: Escondido
Posts: 11,373
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by mumra
Thanks Miaplaya for the pics. Nice setup BTW! Did you mount them (amps) directly to the floor or did you build an amp rack? Also, is heat an issue for you? Did you mount fans or anything?
Bastard (great name btw lol) - Thanks for answering my alt q. I will probably have to build a new box for it like you said. I have a ported and sealed box for it already and neither will really fit. The sealed box will sort of fit standing up but looks like hell. I might do something completely custom and have a sub box built with places for my amps to flank each side of the sub. My brother is a finish carpenter and is very good at stuff like that. I will try and make it as stealthy as possible.
Thanks Miaplaya for the pics. Nice setup BTW! Did you mount them (amps) directly to the floor or did you build an amp rack? Also, is heat an issue for you? Did you mount fans or anything?
Bastard (great name btw lol) - Thanks for answering my alt q. I will probably have to build a new box for it like you said. I have a ported and sealed box for it already and neither will really fit. The sealed box will sort of fit standing up but looks like hell. I might do something completely custom and have a sub box built with places for my amps to flank each side of the sub. My brother is a finish carpenter and is very good at stuff like that. I will try and make it as stealthy as possible.
#13
Registered User
Join Date: Nov 2002
Location: Cincinnati, Ohio
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Geeez... no more trunk for that Miaplaya guy....
I'm gonna take pics tonight of my system and mountings and post them here. You guys tell me what you think...
I did it all myself and have never even come close to doing anything like it before.... I'm pretty proud!! LOL
I'm gonna take pics tonight of my system and mountings and post them here. You guys tell me what you think...
I did it all myself and have never even come close to doing anything like it before.... I'm pretty proud!! LOL
#14
Registered User
Join Date: Nov 2002
Location: Cincinnati, Ohio
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Also, mumra, I went the last 2-3 months with the CAP out of my car (cuz i was waiting to install mute circuit) and just recently put it back in. It hits much harder and sounds much better WITH the CAP installed....
Also, obviously, when I really crank it up I get no dim lights and power problems...
Why spend a ****-load of cash on upgrading your charging system when all you gotta do is install a capacitor??????
Also, obviously, when I really crank it up I get no dim lights and power problems...
Why spend a ****-load of cash on upgrading your charging system when all you gotta do is install a capacitor??????
#15
Registered User
iTrader: (3)
Join Date: Jul 2003
Location: Escondido
Posts: 11,373
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by SmokinZ
Geeez... no more trunk for that Miaplaya guy....
I'm gonna take pics tonight of my system and mountings and post them here. You guys tell me what you think...
I did it all myself and have never even come close to doing anything like it before.... I'm pretty proud!! LOL
Geeez... no more trunk for that Miaplaya guy....
I'm gonna take pics tonight of my system and mountings and post them here. You guys tell me what you think...
I did it all myself and have never even come close to doing anything like it before.... I'm pretty proud!! LOL
#16
Originally posted by SmokinZ
I'd like to see what that looks like with tweets mounted in the door.... hmmmm...
I'd really like to know how in the heck you plan on doing that ...lol
I'd like to see what that looks like with tweets mounted in the door.... hmmmm...
I'd really like to know how in the heck you plan on doing that ...lol
#18
Registered User
Thread Starter
Join Date: May 2004
Location: ohio
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
hmmm...some good ideas for sure, thanks guys. I hate drilling into the door panel, especially since it has almost no flat spots. I am going to tear into this thing this weekend. I need to examine that cubby hole a little better and really plan out how I want to mount the amps I guess; I really like full stealth designs.
Smokin - don’t forget to post some pics, I would like to see. Never heard of on O6 orbital battery? Is it new?
Smokin - don’t forget to post some pics, I would like to see. Never heard of on O6 orbital battery? Is it new?
#19
Registered User
Join Date: Nov 2002
Location: Cincinnati, Ohio
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by mumra
hmmm...some good ideas for sure, thanks guys. I hate drilling into the door panel, especially since it has almost no flat spots. I am going to tear into this thing this weekend. I need to examine that cubby hole a little better and really plan out how I want to mount the amps I guess; I really like full stealth designs.
Smokin - don’t forget to post some pics, I would like to see. Never heard of on O6 orbital battery? Is it new?
hmmm...some good ideas for sure, thanks guys. I hate drilling into the door panel, especially since it has almost no flat spots. I am going to tear into this thing this weekend. I need to examine that cubby hole a little better and really plan out how I want to mount the amps I guess; I really like full stealth designs.
Smokin - don’t forget to post some pics, I would like to see. Never heard of on O6 orbital battery? Is it new?
I will have pics here in a few hours, check back later this evening!
"O6" battery is new name for NAPA's orbital battery. (made by DEKA / EAST PENN)
best battery on market, period.
#20
Registered User
iTrader: (3)
Join Date: Jul 2003
Location: Escondido
Posts: 11,373
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by SmokinZ
Well, my design is DEFINITELY not stealthy... Heh Heh.
I will have pics here in a few hours, check back later this evening!
"O6" battery is new name for NAPA's orbital battery. (made by DEKA / EAST PENN)
best battery on market, period.
Well, my design is DEFINITELY not stealthy... Heh Heh.
I will have pics here in a few hours, check back later this evening!
"O6" battery is new name for NAPA's orbital battery. (made by DEKA / EAST PENN)
best battery on market, period.