VDC and road course racing
#2
Registered User
iTrader: (18)
Join Date: Apr 2006
Location: Piscataway, NJ
Posts: 2,148
Likes: 0
Received 0 Likes
on
0 Posts
On a course, maost of the places you can wreck have a gravel shoulder to spin out on. Mountains roads only give you a gaurdrail between you and garanteed death. Take it off on the track and leave it on on the mountains...unless you have a death wish or are a really really really good driver.
#6
Registered User
iTrader: (21)
Join Date: Nov 2006
Location: Haines City, Fl
Posts: 841
Likes: 0
Received 0 Likes
on
0 Posts
i thought vdc used a mixture of front and rear brakes to control
body roll, stability etc..-similiar to how esp works on chrysler vehicles
depending on understeer and oversteer conditions the car is exposed to
i know i used vdc on my first two events as Sebring and rear brakes
got super hot, did not use last time and have kept it off during spirited
driving and auto-x
body roll, stability etc..-similiar to how esp works on chrysler vehicles
depending on understeer and oversteer conditions the car is exposed to
i know i used vdc on my first two events as Sebring and rear brakes
got super hot, did not use last time and have kept it off during spirited
driving and auto-x
Trending Topics
#9
Registered User
iTrader: (2)
Originally Posted by 2fast4ya
i thought vdc used a mixture of front and rear brakes to control
body roll, stability etc..-similiar to how esp works on chrysler vehicles
depending on understeer and oversteer conditions the car is exposed to
i know i used vdc on my first two events as Sebring and rear brakes
got super hot, did not use last time and have kept it off during spirited
driving and auto-x
body roll, stability etc..-similiar to how esp works on chrysler vehicles
depending on understeer and oversteer conditions the car is exposed to
i know i used vdc on my first two events as Sebring and rear brakes
got super hot, did not use last time and have kept it off during spirited
driving and auto-x
I believe it is the ABLS that cooks the rear brakes.
VDC should be off @ the track. Better yet, disable the yaw sensor to prevent it from kicking in under heavy braking.
Hopefully, you're not driving hard enough on open road for the VDC to kick in...
I used to turn it OFF all the time, untill that bridge thing... Lol
#10
New Member
iTrader: (17)
VDC - Off for the track for sure....it will slow you down and screw up your line when it kicks in at will...just at the worst time normally (mid-corner)
However it's your call on the street....but it is wet/gravel/crappy road, you might leave it on
However it's your call on the street....but it is wet/gravel/crappy road, you might leave it on
Originally Posted by VIZAGE
Is it best to leave VDC off when road course racing? What about on mountain runs? Basically the same thing though, somewhat.
#13
8 to 11
iTrader: (7)
Originally Posted by VIZAGE
Is it best to leave VDC off when road course racing? What about on mountain runs? Basically the same thing though, somewhat.
#14
Originally Posted by betamotorsports
If you have to ask about leaving VDC on or off, leave it on. You're not ready to turn it off yet.
#15
Registered User
iTrader: (2)
Originally Posted by betamotorsports
If you have to ask about leaving VDC on or off, leave it on. You're not ready to turn it off yet.
The G and Z are heavy cars, and when the back starts to come around, it does so with determination. If you have developed the ability to "steer with your feet" and have "Jackie Chan hands" on the wheel for countersteer, then you will turn it off. If you don't know exactly what the meaning of the above preceding sentence is and how to do it, leave it on.
For an aggressive and experienced driver, it is actually more safe to turn the darn VDC off. For everyone else, it is safer to leave it on.
#17
Same goes for Traction Control System (TCS)? My first track event coming up and I'm thinking so. I only feel it kick in when I'm making right hand turns in spirited street driving, and wicked annoying then.
#18
New Member
iTrader: (17)
Note: Even with VDC off, the damned Brake-force-distribution thing kicks in when braking and turning hard at the same time....I plan to pull my "yaw sensor" for the next track day.....as I am literally "smoking" my front pads when I trail brake....I just ran Barber Motorsports Park and had smoke from both from wheels after each session until I stopped trying to brake and turn at the same time. However, I was OK if I just did threshold braking. I started to pull the ABS fuse, but I didn't want to make changes to the car at the track, 3 hours away from home.
I always had this problem, even with stock wheels/tires. However, it is much worse now that I run a "Square wheel/tire" setup.....It is weird, but I don't have ANY issues with this setup on the street even with VDC on.
I always had this problem, even with stock wheels/tires. However, it is much worse now that I run a "Square wheel/tire" setup.....It is weird, but I don't have ANY issues with this setup on the street even with VDC on.
#19
Registered User
iTrader: (2)
Originally Posted by laze1
Note: Even with VDC off, the damned Brake-force-distribution thing kicks in when braking and turning hard at the same time....I plan to pull my "yaw sensor" for the next track day.....as I am literally "smoking" my front pads when I trail brake....I just ran Barber Motorsports Park and had smoke from both from wheels after each session until I stopped trying to brake and turn at the same time. However, I was OK if I just did threshold braking. I started to pull the ABS fuse, but I didn't want to make changes to the car at the track, 3 hours away from home.
I always had this problem, even with stock wheels/tires. However, it is much worse now that I run a "Square wheel/tire" setup.....It is weird, but I don't have ANY issues with this setup on the street even with VDC on.
I always had this problem, even with stock wheels/tires. However, it is much worse now that I run a "Square wheel/tire" setup.....It is weird, but I don't have ANY issues with this setup on the street even with VDC on.
#20
New Member
iTrader: (17)
Correct, no 100 MPH WFO corners on on my way to work...
Seriously, it is really isn't just braking, it is TURNING and Braking at the same time that make things go crazy.
Seriously, it is really isn't just braking, it is TURNING and Braking at the same time that make things go crazy.
Originally Posted by Kolia
You're probably not "standing" on the brake hard enough on the street for the VDC to kick back in. For the electronic, standing on the brakes = panic situation so it get's back on to keep you straight.