Track Car Interior???
#1
![Default](https://my350z.com/forum/images/icons/icon1.gif)
I was looking at tracking my car and was hoping to get some info on the occupant safety stuff the track guys are running.
I would like to know what seat or seats, guys are running, cage or rollbar and harnesses, most are using. Pics would be nice. I drive my car sometimes on the street and would like to know how far I would have to go and what the comfort level would be if I were to do this.
THANX
I would like to know what seat or seats, guys are running, cage or rollbar and harnesses, most are using. Pics would be nice. I drive my car sometimes on the street and would like to know how far I would have to go and what the comfort level would be if I were to do this.
THANX
#3
Registered User
iTrader: (19)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Cobra Susuzka S drivers seat, Cobra Imola passenger seat, G-Force 6 point harnesses and Autopower race roll bar.
Once I get the car on scales, I will decide what I will strip out.
Right now only the rear is gutted.
Car is still street driven, the seats are pretty comfy, and the bar does not intrude at all.
![](http://i85.photobucket.com/albums/k49/AxeleratexXx/DSCF1483.jpg)
Once I get the car on scales, I will decide what I will strip out.
Right now only the rear is gutted.
Car is still street driven, the seats are pretty comfy, and the bar does not intrude at all.
![](http://i85.photobucket.com/albums/k49/AxeleratexXx/DSCF1483.jpg)
![](http://i2.photobucket.com/albums/y24/GNUsnowboarder/P1000091.jpg)
#4
![Default](https://my350z.com/forum/images/icons/icon1.gif)
That seat looks great!!
Is it possible to route the factory shoulder belt through the top holes in the seat though????
That would solve my problem of not wanting to use the harnesses all that much on the street.
Also is that a weld in roll bar you have?
Does anyone know if we have bolt in roll bars similar to what alot of the guys who track the GT3's are using???
THANX
Is it possible to route the factory shoulder belt through the top holes in the seat though????
That would solve my problem of not wanting to use the harnesses all that much on the street.
Also is that a weld in roll bar you have?
Does anyone know if we have bolt in roll bars similar to what alot of the guys who track the GT3's are using???
THANX
#5
Registered User
iTrader: (19)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
I'm sure you could if you un-bolted the belt.
I don't run the harnesses on the street and yes I know I shouldn't run the the stock belt like it is, but I'm lazy.
Yes, the Autopower bar is a weld in with a harness and cross bar that can be bolted out. Kirk Racing makes a bolt in bar, but it eats up the passenger space and might be uncomfortable for picky wives or large passengers.
I don't run the harnesses on the street and yes I know I shouldn't run the the stock belt like it is, but I'm lazy.
Yes, the Autopower bar is a weld in with a harness and cross bar that can be bolted out. Kirk Racing makes a bolt in bar, but it eats up the passenger space and might be uncomfortable for picky wives or large passengers.
#6
Registered User
iTrader: (19)
Join Date: Apr 2007
Location: Houston,TX
Posts: 1,395
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by Axelerate
I'm sure you could if you un-bolted the belt.
I don't run the harnesses on the street and yes I know I shouldn't run the the stock belt like it is, but I'm lazy.
I don't run the harnesses on the street and yes I know I shouldn't run the the stock belt like it is, but I'm lazy.
which combo of sliders/base/side mounts did you used? all the cobra stuff?..
and... did you had to modify anything? I'm planning to use a cobra imola GT (the wider one.. I'm 34 waist, 5'11") and for daily driving I was thinking that the suzuka with high sides would be quite a PITA.
thanks :-)
Trending Topics
#8
Registered User
iTrader: (1)
Join Date: Feb 2003
Location: North Carolina
Posts: 689
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by Axelerate
Cobra Susuzka S drivers seat, Cobra Imola passenger seat, G-Force 6 point harnesses and Autopower race roll bar.
Once I get the car on scales, I will decide what I will strip out.
Right now only the rear is gutted.
Car is still street driven, the seats are pretty comfy, and the bar does not intrude at all.
![](http://i85.photobucket.com/albums/k49/AxeleratexXx/DSCF1483.jpg)
![](http://i2.photobucket.com/albums/y24/GNUsnowboarder/P1000091.jpg)
Once I get the car on scales, I will decide what I will strip out.
Right now only the rear is gutted.
Car is still street driven, the seats are pretty comfy, and the bar does not intrude at all.
![](http://i85.photobucket.com/albums/k49/AxeleratexXx/DSCF1483.jpg)
![](http://i2.photobucket.com/albums/y24/GNUsnowboarder/P1000091.jpg)
Thanks...
#11
Registered User
iTrader: (9)
Join Date: Jan 2004
Location: CA
Posts: 1,151
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by Ataru074
ok.. you have the cobra seats... (finally somebody)...
which combo of sliders/base/side mounts did you used? all the cobra stuff?..
and... did you had to modify anything? I'm planning to use a cobra imola GT (the wider one.. I'm 34 waist, 5'11") and for daily driving I was thinking that the suzuka with high sides would be quite a PITA.
thanks :-)
which combo of sliders/base/side mounts did you used? all the cobra stuff?..
and... did you had to modify anything? I'm planning to use a cobra imola GT (the wider one.. I'm 34 waist, 5'11") and for daily driving I was thinking that the suzuka with high sides would be quite a PITA.
thanks :-)
I also run my stock belt on the street with the belt routed through the lower outside hole in the seat to ensure a tight fit on my waist. You can see what I'm referring to in the link below.
There are many threads on roll bars and even a dedicated thread on the Cobra seats. Best bet is to find a local retailer that will let you sit in some.
https://my350z.com/forum/competition...a-gt-seat.html
#12
Registered User
iTrader: (19)
Join Date: Apr 2007
Location: Houston,TX
Posts: 1,395
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by Axelerate
No, I cheated and I am using Nagisa side mount rails. They lower the seat a great deal and work well.
They are not FIA rated, so they are a no go for race cars. If I go to a full cage someday I will mount them to the chassis.
They are not FIA rated, so they are a no go for race cars. If I go to a full cage someday I will mount them to the chassis.
#13
Registered User
iTrader: (7)
Join Date: Mar 2006
Location: Arizona
Posts: 481
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by JETPILOT
Heres a link to a good article on what you should add and when you should add it.
http://www.trackpedia.com/wiki/Safety_at_the_track
http://www.trackpedia.com/wiki/Safety_at_the_track
![thumbup](https://my350z.com/forum/images/smilies/biggthumpup.gif)
A couple thousand dollars to do things right, rendering the car nearly unstreetable. I'll be relying on the OEM equipment for a while. Very good info on anti-submarining. I was not aware of the whole organ-crushing thing. That changes my mind about using a 4 point harness with OEM seats on anything other than an autocross.
#14
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by JETPILOT
Heres a link to a good article on what you should add and when you should add it.
http://www.trackpedia.com/wiki/Safety_at_the_track
http://www.trackpedia.com/wiki/Safety_at_the_track
Just an FYI, a lot of that was written by our very own STACK. He's a great resource for track safety and the latest on the equipment available. He can also answer a lot about the impact of doing some of the safety items on the street such as some cars you can do a rollbar safely since it would be behind the b-pillar..others can not.
#15
Registered User
iTrader: (19)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by Ataru074
no, right now I don't care about FIA rating... I was just looking for something like your solution... roll bar and seats (your roll bar looks good). if the nagisa rails allow to stay 1 inch (or maybe a little more) lower than stock I'm ok with that.
They will lower the seat to the floor.
#16
Registered User
iTrader: (19)
Join Date: Apr 2007
Location: Houston,TX
Posts: 1,395
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by Axelerate
They will lower the seat to the floor.
![](https://my350z.com/forum/images/smilies/icon21.gif)
![Big Grin](https://my350z.com/forum/images/smilies/biggrin.gif)
#18
New Member
iTrader: (51)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Here is the Racetech link.... I think they make the best seats.
http://www.racetechseatsna.com/
Putting in a 6 point cage makes the car unstreetable in my opinion. Too hard to get in and out. Same with a race set. What a *****.
A 4 point roll bar in my opinion is still streetable. A full cage would be too risky for street driving. Your head is too close in proximity to the side bar.
Don't forget some kind of HANS device for the track. wearing a helmet adds extra weigh increasing the risk for a basal skull fracture in certain accidents.
http://www.racetechseatsna.com/
Putting in a 6 point cage makes the car unstreetable in my opinion. Too hard to get in and out. Same with a race set. What a *****.
A 4 point roll bar in my opinion is still streetable. A full cage would be too risky for street driving. Your head is too close in proximity to the side bar.
Don't forget some kind of HANS device for the track. wearing a helmet adds extra weigh increasing the risk for a basal skull fracture in certain accidents.
#20
New Member
iTrader: (17)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Yep, i just went thru this decision making process...
I purchased a used Kirk 4-point "bolt-in roll bar, and did a 'test-fit"....and it fits, but I do not! My head is WAY TOO CLOSE to the upper roof bar for use without a helmet. DAMN!
BTW: I am 6' 1", with a long torso, short Arms and Legs.....I sit "high" in the seat, and relatively close to the wheel on the track, back a little on the street.
I played with seat positioning and all that, but still not safe....I am trying to decide if it is worthwhile to only install this for Time Trial event,,,and take it out for DD-duty and HPDE....
But I am LaZe1, and this is too much work for me.......so I will likely just sell this one. Just like most posters, I am now trying to get the money to make this Z or some other car a "dedicated track car".....the only way to go if you are really driving fast....and want to be as safe as possible.
I purchased a used Kirk 4-point "bolt-in roll bar, and did a 'test-fit"....and it fits, but I do not! My head is WAY TOO CLOSE to the upper roof bar for use without a helmet. DAMN!
BTW: I am 6' 1", with a long torso, short Arms and Legs.....I sit "high" in the seat, and relatively close to the wheel on the track, back a little on the street.
I played with seat positioning and all that, but still not safe....I am trying to decide if it is worthwhile to only install this for Time Trial event,,,and take it out for DD-duty and HPDE....
But I am LaZe1, and this is too much work for me.......so I will likely just sell this one. Just like most posters, I am now trying to get the money to make this Z or some other car a "dedicated track car".....the only way to go if you are really driving fast....and want to be as safe as possible.