When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
5Zigen FN01R-C 17X10 +25 and 332mm Stoptechs...will it work?
Okay guys...I'm about to send a guy the cash for some FN01R-C's. They're 17X10 +25 offset all the way around which I know is a pretty common setup here. My question is...I was planning to run Stoptech's 332mm front kit w/ the stock stage 2 kit in the rear, for now. Will the 332's and the rotors fit w/ this setup?
Fear of oversteer is a mistake. A balanced tire setup on a 350Z is the best way to get started on the track because you need to learn about oversteer (cornering limit oversteer, not stab the throttle oversteer). A balanced tire size setup works best for the above and it also lets you rotate the tires so they last longer. 245s all around is my suggestion and its something I've done when I first start running the 350Z.
Square setup
I have BFG KW 245-40/18f 24545/18r. It has been a good all-around balancing act while learning to track your Z (Note: The 350Z needs to "rotate" while cornering which I thinck he is referring to in betamotorsports post). You may want to swap out your sway bar/end-links with adjustable settings to suit your driving as your ladder-up in class. You likely toast the 35th Addition front calipers if you track your Z frequently. Rear calipers seem to last in my experiance.
can anyone show a picture of 285/30's on a 8" wheel. pref on the car
I'll see what I can dig up as far as front shot of my car.
Compared to a friend's RX-8 on 285/30R18s, even the front stock track wheels (18x8) lay down all (or most) 285 of the Kumho V710s, and they wear very evenly.
Enkei RPF-1
18x10.5 +15 Front
18x10.5 +0 Rear
Kumho V710 285/30/18 Front and Rear
Are these factory rim offsets? Just curious on the +0 in the rear. These are pretty aggressive offsets so I assume no spacers? Have you tracked this setup yet?
Are these factory rim offsets? Just curious on the +0 in the rear. These are pretty aggressive offsets so I assume no spacers? Have you tracked this setup yet?
I just bought some RPF1s 18x10.5 +15. I'm pretty sure Enkei does not make a +0 for this model, unless he got a custom set.
I would think he's running 15mm spacers in the rears. Can someone confirm?
Hey, I'm looking at the RPF1s also with the +15mm offsets. Did you go the same size -- front & rear? Just curious what size tires you mounted.
The RPF1s I got are 18x9.5 +15 F and 18x10.5 +15 R and I ordered Falken 452s 245/40/18 F and 275/40/18 R. Waiting for the tires to come so I can get them mounted on. I'm only going to be tracking my car 2-3 times a year at most so I opted for the typical staggered setup.