Really good info in this thread. I plan on installing some sort of cooler next year hopefully

 

Here's a pic of my oil cooler-

Fittings are Earls -10, 2X straight, 2X90deg
HKS sandwich
Earls 41310 ( Earls demo'd this size on Chev V8 )
I did the fitting while installing a HKS S/C. I used S/S bolt and nut to attach to the bottom of the bumper. The facia needed a bit of trimming on the inside for clearance of the cooler

http://images.ibsrv.net/ibsrv/res/sr...attach/jpg.gif
http://images.ibsrv.net/ibsrv/res/sr...attach/jpg.gif

 

Hi Guy,

Thinking of getting the Defi Advance ZD for my 350Z. I know i need the GReddy Trust sensor sandwich plate to have the oil temp and pressure sensor put in.

But what if i planned to get an oil cooler within the next month or 2? Do i still need this GReddy Trust sensor sandwich plate? I'm unsure exactly how everything gets put together. Can i get some insight please?

 

Hey dude, I run a Fluidyne DB-30816-26 with a thermostatic sandwhich adapter and Earl's SS lines, I made my own hanger brackets and it fits over the nismo bumper and assorted dampers.

This is at AMS in September, after destroying the Nismo Bumper at VIR in September


I actually Hang the cooler from the Crash bar, which gets it in front of the everything else.



The highest oil temps I've seen at 238 and that was on a miserable 105 SC day at CMP