LED's in the Door Handle's. (56k Maybe)
very nice! I'm thinking about doing this sometime in the near future, since i'm trying to achieve that jdm bippu look.
Acree is the MAN
I did this mod last night and the only addition i could make is cover the front of your handles with masking tape before drilling to prevent fraying on the front of the handle ... and also to keep the epoxy of the handle when filling the holes.... Great advise acree... Thank you for your responses to my questions and
I used leds from pep boys they came in a 3 pack and i used a SHARP wire cutter to snip the ends of the LED glass off to keep it RECESSED under the face of the handle..... This and the black out housings are the 2 BEST mods ever....
Epoxy 5.00
LEDs- 7.99 each 3 pack
Look after it was done..... Priceless
Black out Headlights
Silicone 5.00
Flat black Paint 6.99 per can
Primer 6.00
Look after it was done..... Priceless
As you can see both of these mods can be done together in a weekend and cost around 50.00 together....
Best money EVER spent.....
I used leds from pep boys they came in a 3 pack and i used a SHARP wire cutter to snip the ends of the LED glass off to keep it RECESSED under the face of the handle..... This and the black out housings are the 2 BEST mods ever....
Epoxy 5.00
LEDs- 7.99 each 3 pack
Look after it was done..... Priceless
Black out Headlights
Silicone 5.00
Flat black Paint 6.99 per can
Primer 6.00
Look after it was done..... Priceless
As you can see both of these mods can be done together in a weekend and cost around 50.00 together....
Best money EVER spent.....
Thread
Thread Starter
Forum
Replies
Last Post
(OEM) FS: 2008 Base 6 Speed Custom Blue Color.
darkzschneider
Zs & Gs For Sale
8
Aug 14, 2011 05:09 PM
