When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Injected Performance is proud to re-release availability of a fully compatible wideband gauge for the Haltech dual channel wideband kit. Available for the first time ever, we are now able to offer a single 52mm gauge that is capable of displaying wideband reading for your Haltech wideband kit with two sensors. The amber lighting, although not exactly the same color as the Nissan 350Z gauge cluster, is as close as we were able to source. The 0-5V output of the gauge matches exactly what the Haltech ECU expects, which is critical for proper readings, and the primary reason there are limited gauge options available. This is currently the only gauge on the market that is 100% compatible with the Haltech dual channel wideband kit.
These are stocked with the black bezel and amber lighting, as pictured. Alternative bezel and light colors are available upon special order. Please contact us for details.
Note: Customers using the dual channel wideband kit with only one sensor will be able to use the new official Haltech wideband gauge, which is due to be released soon.
You may send paypal to: sales@injectedperformance.com (we must ship to confirmed addresses) or feel free to give me a call to place the order.
i see 5 wires. is it wired inline with the wideband , without causing the signals to be altered?
Probably ground/power/illumination or ign on
The other 2 wires are probably signal wires from each wideband for a total of 5
The widebands have their own power source and controller this is mainly a display so all you have to do is T or Y the wire from the wideband so one wire goes to the Haltech the other to the gauge.
Injected Performance Dual Display Wideband Gauge- Haltech Compatible
