can anyone tell me how to mod the cusco a-arms to allow for more positive camber? i have purchased a set and do not believe that they will allow enough of a positive camber adjustment to get my fronts back into spec... right now i'm riding on 245/35 r19 with a 20mm offset... i believe the left is at -1.4" and the right is at -1.5" of camber... i would like to get them both back around -0.7"... can anyone help me with the proper settings (alan bolts) to achieve this?

thanks!

 

I'm interested too.

 

http://www.*********.com/forums/inde...&hl=cusco+arms

for the ****** part put in the word 350z, then the symbol - , then the word tech.

 

Thanks. That explains why I couldn't find it here.

 

thanks, g35sedan! looks like i won't have a use for these arms... i don't think cutting that material is safe... if the small alan bolts break, that thing will slide out no problem... ugh.

anyone need a brand new set of cuscos in the box??

 

For $50 sure =)

 

Your welcome, just took me a second to post no biggie.

I'm one of those people that has no fear when it comes to doing something that may be preceived as out of the box, providing it's safe and I think it will work. But I get it, that some may not be cut from that same block. I'd price the arms at $320 or so IMO in the marketplace here if you really want to bail on them.

 

actually, i decided to keep them... i installed them today on their greatest postive setting... they took out enough negative to keep me happy... thanks again!